Ok, by some great and wonderful streak of stupidity, I seem to have somehow completely fscked up my router.
It's hooked up to an ADSL modem, running PPPoE (Roaring Penguin), and that part looks like it's working great. I've got 2 other network cards, both 3Com 905B. I have the 3c59x module loading with modprobe, and I've checked ifconfig, and both cards look to be setup correctly. eth0 is 192.168.0.1, and eth1 is 192.168.1.1 (Incedentally, eth2 is an NE2k-pci card, for the PPPoE client). I can see the world just fine from the router (I'm telnetting to an ISP where my maail is hosted to send out this message, and I'm on the router now), but I can't ping anything on my 192.168.0.0 network (192.168.1.0 isn't used yet). The route command returns: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface ADSL-NAME * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth1 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 default ADSL-NAME 0.0.0.0 UG 0 0 0 ppp0 (I had to tyype this in by hand, so any formatting problems are mine.) This all looks OK to me, but pinging just gives 100% packet loss, and traceroute to 192.168.0.2 from the router gives: traceroute: sendto: Operation not permitted 1 traceroute: wrote 192.168.0.2 38 chars, ret=-1 So, the question is, how have I managed to bugger this up, since it was working fine this morning. I recompiled a new 2.2.17 kernel, but AFAIK I picked all the options that I needed. My old (working) kernel was 2.2.14. Did I forget some vital piece of information? Thanks very much for any help. Adam OH, I also meant to ask. I used to use linuxconf on my RH systems. Is there an equiv. for Debian? Something better, perhaps?
