Has anybody gotten i810 (specifically i810e if there is a
difference) working with GLX and something like quake2 ?
I cannot get the newer agpgart to work with X no matter what.
I can get the older agpgart(from intel) to load with both XF86_SVGA and
XFCom_i810. X loads fine, i installed utah-glx deb v0.0.20000516, changed
XF86Config, and glx.so loads fine. But X crashes every single time i try
to run quake with +set vid_ref glx
(tried several different configurations)
X output using XFCom_i180 and agpgart 0.03 and the above glx:
XFCom_i810 Version 1.0.0 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: October 13 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://support.intel.com)
Operating System: Linux 2.2.5-15 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
i810, i810-dc100, i810e, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "microsoft"
(**) XKB: layout: "us"
(**) Mouse: type: IMPS/2, device: /dev/psaux, resolution: 300
(**) Mouse: buttons: 5
(**) Mouse: zaxismapping: (-)4 (+)5
(--) no ModulePath specified using default: /usr/X11R6/lib/modules
Sucessfully loaded XFree86 3.3 symbols
GLX extension module for XFree86 3.3.3.1 -- Mesa version 3.2
GLX package version 0.9, GLX protocol version 1.2.
(**) module glx.so successfully loaded from /usr/X11R6/lib/modules
(**) SVGA: Graphics device ID: "i810e"
(**) SVGA: Monitor ID: "Primary Monitor"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,inet/<my
ip address>:7101"
(--) SVGA: PCI: Intel Unknown chipset (0x7125) rev 3, Memory @ 0xf4000000,
0xff000000
(--) SVGA: GART: allocated 4096K system ram
(--) SVGA: chipset: i810e
(--) SVGA: videoram: 4096k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 163.000 MHz
(**) SVGA: Mode "1024x768": mode clock = 85.000
(**) SVGA: Mode "800x600": mode clock = 69.650
(**) SVGA: Mode "640x480": mode clock = 45.800
(**) SVGA: Mode "400x300": mode clock = 17.580
(**) SVGA: Mode "320x240": mode clock = 15.750
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: Intel i810e
(--) SVGA: i810e: MMIO registers at 0xFF000000
(--) SVGA: i810e: Linear framebuffer at 0xF4000000
(--) SVGA: i810e: Using hardware cursor
(--) SVGA: Setting dot clock to 84.9 MHz [ 0x2c 0xb 0x20 ] [ 46 13 2 ]
(--) SVGA: chose watermark 0x2220e000: (tab.freq 94.0)
nvisual=32 (0+32)
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: Indirect CPU to screen color expansion (imagetext,
polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
Initializing logs
Sucessfully loaded XF86_SVGA server symbols
Sucessfully initialized i810 driver symbols
(then when i load quake..)
i810InitGLX
GART: allocated 8192K system ram
temporarily hardwiring GLX_I810_CMDSIZE = 1
[???] i810InitGLX completed
Creating new client: 7!
Adding client as resource: 566231040!
[???] ### Creating new xsmesa context for i810 ...
[???] ### Creating new xsmesa context for i810 ...
[???] Unknown width in GLXCreateImage
Fatal server error:
Signal 11
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
xinit: connection to X server lost.
output from quake2 v3.20:
sending isdirect request
isdirect succeeded
going direct
got reply i810GLXClientInit
try to open /usr/X11R6/lib/modules/glx.so:
opened /usr/X11R6/lib/modules/glx.so
found init func
got api pointers
got dispatch table
calling init func:
./quake2: undefined symbol: XListPixmapFormats./quake2: undefined
symbol: XGetVisualInfo./quake2: undefined
symbol: XAllocColor./quake2: undefined
symbol: XQueryColors./quake2: undefined
symbol: XChangeGC./quake2: undefined symbol: XFreeGC./quake2: undefined
symbol: XCreateGC./quake2: undefined
symbol: XGetGeometry./quake2: undefined
symbol: XSetErrorHandler./quake2: undefined
symbol: XGetWindowAttributes./quake2: undefined
symbol: XDrawPoints./quake2: undefined
symbol: WriteToClient./quake2: undefined symbol: FlushAllOutputX11 client
symbol(s) not found
failed to load glx.so
--
Running Debian 2.2(potato) on a Dell Optiplex GX110 P3-500 i810 128MB. If
you need more info lemme know. I'd really like to get this workin
:) I'm going to keep playing with it. just incase.
nate
:::
http://www.aphroland.org/
http://www.linuxpowered.net/
[EMAIL PROTECTED]
11:15am up 2 days, 20:17, 2 users, load average: 0.53, 0.41, 0.16
