Hi again,
I tried that and it still gives the same errors....... anyway here is the log of my Dialup networking using the same ISP ........ 03-02-2000 15:28:24.99 - Initializing modem. 03-02-2000 15:28:24.99 - Send: ATE0Q0V1<cr> 03-02-2000 15:28:24.99 - Recv: ATE0Q0V1<cr> 03-02-2000 15:28:25.12 - Recv: <cr><lf>OK<cr><lf> 03-02-2000 15:28:25.12 - Interpreted response: Ok 03-02-2000 15:28:25.12 - Send: AT&FE0V1&A3&B1&D2&S0&C1S0=0<cr> 03-02-2000 15:28:25.24 - Recv: <cr><lf>OK<cr><lf> 03-02-2000 15:28:25.24 - Interpreted response: Ok 03-02-2000 15:28:25.24 - Send: ATS7=60S19=0M0&M4&K1&H1&R2&I0B0X4<cr> 03-02-2000 15:28:25.37 - Recv: <cr><lf>OK<cr><lf> 03-02-2000 15:28:25.37 - Interpreted response: Ok 03-02-2000 15:28:25.38 - Dialing. 03-02-2000 15:28:25.38 - Send: ATDT#######<cr> 03-02-2000 15:28:45.25 - Recv: <cr><lf>CONNECT 31200/ARQ/V34/LAPM/V42BIS<cr><lf> 03-02-2000 15:28:45.25 - Interpreted response: Connect 03-02-2000 15:28:45.25 - Connection established at 31200bps. 03-02-2000 15:28:45.25 - Error-control on. 03-02-2000 15:28:45.25 - Data compression on. 03-02-2000 16:31:19.41 - Remote modem hung up. 03-02-2000 16:31:19.41 - Recv: <cr><lf>NO CARRIER<cr><lf> 03-02-2000 16:31:19.41 - Interpreted response: No Carrier 03-02-2000 16:31:19.42 - Hanging up the modem. 03-02-2000 16:31:19.42 - Send: ATH<cr> 03-02-2000 16:31:19.55 - Recv: <cr><lf>OK<cr><lf> 03-02-2000 16:31:19.55 - Interpreted response: Ok 03-02-2000 16:31:19.55 - 115200,N,8,1 Please respond to Wolfgang Rufeger <[EMAIL PROTECTED]> To: Faisal Mahdi/Saudi Arabia/[EMAIL PROTECTED] cc: Subject: Re: Unidentified subject!
> I have a PII PC which is running win 98 and Linux, I tried setting up my > ISP connection using "pppd" and "chat" but I > didn't get very far, i thought the script i wrote was wrong...... > However when I used Kppp I failed also with a message in the > /var/log/message: > <Date&Time> pppd [<process number>] : CHAP authenticantion successful > <Date&Time> pppd [<process number>] : remote host unable to determine IP > address > Then I lose the connection Are You using dynamical assignd IP-adresses or static ones ? If You have a static IP-Address, You have to specify it, when connecting to Your ISP. Othetwise you have to use ipcp-accept-local and ipcp-accept-remote in Your ppp-options file. > and how can I change the Modem speed while connected? I know BREAK [ \K ] > changes the speed .... but how do I know if it did and what is the new > speed? Why do You have to chnage the modem-speed while connected ? Do You have to change the modem speed or the serial speed ? The last one can be set also in the options file (for example 115200). Hope this will help You, otherwise send another mail with mire specific information. CU Wolfgang /°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° | e-mail: [EMAIL PROTECTED] | homepage: www.rufeger.de | ICQ: 20269566 | PGP: http://www.wolf-wide-web.de/pgp.html \............................................
