you don't do anything, you run pppconfig and it will do it for you, since ppp is usually not a dedicated link(modem) so pppd will handle bringing the gateway up and down for a ppp connection.
nate On Mon, 28 Feb 2000 [EMAIL PROTECTED] wrote: runner >Hi folks ! runner > runner >I'd like to setup my home network (I installed the cards, softwares, runner >set up ipchains etc.) But I have a final question. If my look out to runner >the world is ppp0, what should I wrote to the /ezc/init.d/network ? runner >The interfaco to the LAN is eth0 and that's clear that I don't have to runner >add the default gateway address to this card, only the broadcast runner >and IP address of this card. But, again, what to write to the ppp0, if runner >this is my inerface to the outside and I get my IP dynamically ? runner >Could anyone post me a working /etc/init.d/network script to the runner >situation like this ? runner >Thanx, runner >Ago runner > runner > runner >-- runner >Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null runner > ----------------------------------------[mailto:[EMAIL PROTECTED] ]-- Vice President Network Operations http://www.firetrail.com/ Firetrail Internet Services Limited http://www.aphroland.org/ Everett, WA 425-348-7336 http://www.linuxpowered.net/ Powered By: http://comedy.aphroland.org/ Debian 2.1 Linux 2.0.36 SMP http://yahoo.aphroland.org/ -----------------------------------------[mailto:[EMAIL PROTECTED] ]-- 7:05am up 192 days, 19:27, 1 user, load average: 1.09, 1.06, 1.09
