Would you know what is going on and how I could successfully install the system?
Additional Information: - I tried booting from the RESC1440 but got a computer freeze on the following message : RAMDISK:Compressed image found at block 0 Couldn't get a free page.... Out of memory VFS: Mounted root (minix filesystem) - so I used the LOWMEM.bin floppy and I was able to boot and partition the hard disk: 16MB swap (type 82 from block 1 to 121) - 2MB temporary root (type 81 from block 122 to 137) - 108MB for / (type 83 from block 138 to 934). The whole disk being used for Linux only. - First strange message after initializing the 16MB swap and 2MB root and typing 4 (exit), I got "SWAP ON... failed". But the install program load nonetheless. - I then configure the keyboard without problem but during the "Configure Device Driver Modules, I get a "can't open /lib/2.0.86/modules" and another "can't open" something (too fast to read it). The install program then goes to "exit, finished with the modules" (I don't get to select any module and then go back to main menu and start "install base system and get terminal problem described in the opening of this message. Well that's it. I sure hope you can help me out. Thank you, Chris ______________________________________________ FREE Personalized Email at Mail.com Sign up at http://www.mail.com?sr=mc.mk.mcm.tag001
