I've posted a question about this earlier this week, but nobody responded.
Is it that much out of the ordinary that no-one can give me some hints or
tips?
- when connecting to my ISP the connection comes up with the correct flow
rate 11500
- after about 8 kb of upstreaming data communication stops
- soon after pppd dies suddenly
I thought is might be a flow control problem, so I set the init string of
my modem to ATZ&K3, but this didn't help a bit. I don't have another
machine to test the pcmcia modem, but when I hook an external to my Acer
TM512 dialup works fabulous. Modem has a hardware failure or still pppd?
Come on guys, Linux ain't much fun without an internet connection, so help
me out on this one, will ya?
--Hans
P.S.
cardctl ident:
Socket 0:
product info: "CIRRUS LOGIC 56K MODEM", "CL-MD56XX", "5.41"
manfid: 0x014e, 0x0088
function: 2 (serial)
Socket 1:
no product info available
------------------------
cardctl config:
Socket 0:
Vcc 5.0V Vpp1 0.0V Vpp2 0.0V
interface type is "memory and I/O"
irq 3 [exclusive] [level]
Speaker output is enabled
function 0:
config base 0x0100
option 0x61 status 0x08 ext 0x00
io 0x02f8-0x02ff [8bit]
Socket 1:
not configured
------------------------
ATI query
ATI: 1.0
ATI 1: CD04.08 - 602H PCMCIA (V.90) NO A/D - SPKR: 04 - DSP PATCH: 097.00
ATI 2: ROM TEST OK
ATI 3: CL-MD56xx
ATI 4:
ATI 5: Present, 32K DSP RAM.000 Host I/F: P. Mem. : 016 Bit 003 W.S. D.
Mem : 008 Bit 001 W.S. DSP code location = INT ROM
ATI 6: USA 1
ATI 7: CIRRUS LOGIC, INC. MODEM ENGINEERING FIRMWARE DEPARTMENT
