On Sat, 22 Jan 2000, you wrote: > On Fri, Jan 21, 2000 at 08:01:18PM +0100, mek wrote: > > dear debbie's, > > > > since yesterday i have problems setting up my internet-connection. > > did with pppconfig, did everything as written in my book, but it didnt work > > at > > all. > > now today i saw when i do tail -f /var/log/messages: > > : abort on (VOICE) > > : abort on (NO DIALTONE) > > : abort on (NO ANSWER) > > : send (ATZ^M) > > : expect (OK) > > : ^M > > : NO CARRIER > > : -- failed > > : Failed (NO CARRIER) > > : Exit > > Try "minicom -s". This will set up the modem parameters, etc. You > should be able to dial to you ISP (use ATDT 1234567 to actually dial the > phone) and it will show you a screen asking for your ID and password. > Then it will spew jibberish. If you can get that far you are doing > well.
mmm thanx! in the meanwhile i was messing around in /etc/chatscripts/provider by editing some lines and it helped, but now i do not see any progress anymore. de chatscript says: ABORT BUSY ABORT VOICE ABORT "NO DIALTONE" ABORT "NO ANSWERE" "" ATZ OK ATDT4 what gives me in /var/log/messages: NO CARRIER^M ^M ATZ^M OK -- got it send (ATDt4^M) Serial connection established. Using interface ppp0 Connect: ppp0 <--> /dev/ttyS0 Remote message local IP adres xxx.xx.xx.x remote IP adres xxx.xx.xx.xxx and here it remains:-( > Also try http://www.grapevine.net/~gromitkc/winmodem.html and make sure > you modem is on the good list. forunately not;-) it's a cablemodem and it worked well under redhat mek
