Robert Marlow hat gesagt: // Robert Marlow wrote:
> if ur using atapi there's a little more to do before going straight to > the howto. first you need to recompile you're kernel so it supports > generic scsi devices, turn off ide cdrom support and turn on ide-scsi > emulation. this should make your atapi cd burner appear to be scsi. Turning off ide-cdrom support is not really necessary if you give lilo the boot option: append="hdd=ide-scsi" # try to use scsi emulation for my ATAPI-cdrom (Replace "hdd" with your ide cdrom port) I have an ATAPI CD-ROM (no writer) that I use as a generic-SCSI device in this way to let cdrdao do audio grabbing :) > note: once you do this you'll have to configure any programs that > point toward cdrom devices such as /dev/hdc (also /dev/cdrom points to > a /dev/hd* file) to point toward scsi cdrom devices such as /dev/scd0. > once that's done you can go to the howto doco and go from there. > you want to know more, make sure your cd-writing howto is the latest > since the old one that comes with slink doesn't cover atapi/ide very > well. I found this lilo-ide-ignore-trick in the newest CD-Writing-Howto: http://www.guug.de/~winni/linux/ bye -- __ __ Frank Barknecht ____ ______ ____ __ trip\ \ / /wire ______ / __// __ /__/ __// // __ \ \/ / __ \\ ___\ / / / ____/ / / / // ____// /\ \\ ___\\____ \ /_/ /_____/ /_/ /_//_____// / \ \\_____\\_____\ /_/ \_\
