On the contrary, every reply helps. If others are using the G400 successfully, I'll conclude my card is defective and get a replacement.
Thanks, Greg Mark Zimmerman wrote: > > I'm using a G400 at [EMAIL PROTECTED] with XFree86 3.3.5 and have > no problems with it. My monitor is a Sony 400PS. I also recall that I > used 3.3.4 for a time without incident. The 3.3.4 experience was with > slink; now using potato. > > Sorry to have been no help. > > - Mark > > On Sun, Nov 28, 1999 at 07:13:51PM -0800, Greg Schulein wrote: > > Hi, > > > > I'm running a Matrox G400 with a Sony G500 display, on a slink system > > that's been upgraded (via apt) to XFree86 3.3.4. The problem I'm > > getting is dark bands that flicker on the screen whenever the on-screen > > image is changing. The scanlines under the dark bands also seem to be > > displaced a few pixels to the left compared to the rest of the > > scanlines. The picture is fine whenever the image is not changing. A > > "changing image" can be an animation, scrolling a window, or even typing > > (like now). This problem is most pronounced at [EMAIL PROTECTED], > > but is present at lower resolutions and color depths as well. Is there > > anyone else out there running a G400 under XFree 3.3.4 that is or is not > > having similar problems? > > > > Thanks, > > Greg > > > > > > -- > > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
