This is what you should see..something along these lines:
XFree86 Version 3.3.5 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: August 23 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.10 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, ET4000, ET4000W32,
ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p,
ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10,
wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202,
sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530,
sis620, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320,
tgui9660,
tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985,
cyber9397dvd
blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426,
clgd5428,
clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
clgd5462,
clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
clgd7541,
clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22,
ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
s3_savage, s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090,
NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535,
ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555,
ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200,
p9100, spc8110, i740, i740_pci, Voodoo Banshee, Voodoo3, generic
(using VT number 12)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "microsoft"
(**) XKB: layout: "us"
(**) Mouse: type: IMPS/2, device: /dev/psaux, resolution: 300
(**) Mouse: buttons: 5
(**) Mouse: zaxismapping: (-)4 (+)5
(--) no ModulePath specified using default: /usr/X11R6/lib/modules
GLX extension module for XFree86 3.3.3.1 -- Mesa version 3.0
GLX package version 0.9, GLX protocol version 1.2.
(**) module glx.so successfully loaded from /usr/X11R6/lib/modules
(**) SVGA: Graphics device ID: "Primary Card"
(**) SVGA: Monitor ID: "Primary Monitor"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
(--) SVGA: PCI: NVidia Riva TNT rev 4, Memory @ 0xe2000000, 0xe3000000
(--) SVGA: chipset: RIVA TNT
(--) SVGA: videoram: 16256k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 350.000 MHz
(**) SVGA: Mode "1024x768": mode clock = 85.000
(**) SVGA: Mode "320x240": mode clock = 15.750
(**) SVGA: Mode "400x300": mode clock = 17.580
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: RIVA TNT: Using hardware cursor
nvisual=32 (0+32)
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: Using 8 128x64 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
[ ..end of X startup .. ]
nate
On Mon, 15 Nov 1999, Brian Boonstra wrote:
boonst >Through a telnet session, I followed Brian's suggestions. Basically, I
have
boonst >an xdm.log but no kdm.log. But kdm is what is runnning. Below is what
I
boonst >found. I'll try to get more tonight when I am at console.
boonst >
boonst >
boonst > - Brian
boonst >
boonst >
boonst >mass % psgrep kdm
boonst >root 269 0.0 0.8 5552 2244 ? S 17:13 0:00
/usr/bin/kdm
boonst >root 277 0.1 1.5 13960 3868 ? S 17:13 0:00
boonst >/usr/bin/X11/X vt7 -auth /var/state/kdm/A:0-Z265qE
boonst >mass % cat xdm.log
boonst >xdm error (pid 281): error 98 binding socket address 177
boonst >
boonst >Fatal server error:
boonst >Server is already active for display 0
boonst > If this server is no longer running, remove /tmp/.X0-lock
boonst > and start again.
boonst >
boonst >
boonst >When reporting a problem related to a server crash, please send
boonst >the full server output, not just the last messages
boonst >
boonst >xdm error (pid 281): server unexpectedly died
boonst >xdm error (pid 281): Server for display :0 can't be started, session
disabled
boonst >mass % ls /var/log/kd*
boonst >zsh: no matches found: /var/log/kd*
boonst >
----------------------------------------[mailto:[EMAIL PROTECTED] ]--
Vice President Network Operations http://www.firetrail.com/
Firetrail Internet Services Limited http://www.aphroland.org/
Everett, WA 425-348-7336 http://www.linuxpowered.net/
Powered By: http://comedy.aphroland.org/
Debian 2.1 Linux 2.0.36 SMP http://yahoo.aphroland.org/
-----------------------------------------[mailto:[EMAIL PROTECTED] ]--
7:39pm up 88 days, 7:12, 1 user, load average: 1.48, 1.71, 1.96
