Environment:
Slink
XFree86 3.3.2.3a-11
xpuzzles 5.4.4-2
AMD K6/266
PS/2 mouse
Cirrus CLGD5446 2MB
1280x1024x8 interlace
Description:
When I click on a tile in xhexagons/xtriangles the screen blanks.
If I hold the mouse button down long enough the monitor goes into
powersave mode. Moving the mouse restores the screen after a brief pause.
I have reproduced this with KDE 1.1.2 and icewm 0.9.15-4, so I think it's
window-manager-independent. Turning off DPMS fixes this, but I'd like to
be able to use the power-save feature on my monitor.
Also, it looks like the 'xkbcomp' message is just the command used to compile
a keymap. Why it's going to stdout instead of being executed I can't imagine.
The "error message" strings are arguments to the command.
The "grep:" message comes from kdebase-1.1.2's changes to Xsetup_0.
It's trying to figure out if I'm using kdm.
/var/log/xdm.log
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs,
tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i,
tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426,
clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077,
oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401,
cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge,
s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200,
ct64300, generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Cirrus Logic GD544x"
(**) SVGA: Monitor ID: "CTX PL5"
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: Cirrus Logic GD5446 rev 0, Memory @ 0xe0000000
(--) SVGA: chipset: clgd5446
(--) SVGA: videoram: 4096k
(--) SVGA: clocks: 25.23 28.32 41.16 36.08 31.50 39.99 45.08 49.87
(--) SVGA: clocks: 64.98 72.16 75.00 80.01 85.23 90.00 95.02 100.23
(--) SVGA: clocks: 108.03 109.77 120.05 126.00 130.06 135.00
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 135.100 MHz
(**) SVGA: Mode "1280x1024": mode clock = 80.000, clock used = 80.012
(**) SVGA: Mode "640x480": mode clock = 31.500, clock used = 31.499
(**) SVGA: Mode "800x600": mode clock = 40.000, clock used = 39.991
(**) SVGA: Mode "1024x768": mode clock = 65.000, clock used = 64.981
(--) SVGA: Virtual resolution set to 1280x1024
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: clgd5446: Internal memory clock register is 0x1f (Extended RAS)
(**) SVGA: clgd5446: Approximate DRAM bandwidth for drawing: 141 of 221 MB/s
(--) SVGA: clgd5446: Using linear framebuffer at 0xe0000000 (3584MB)
(--) SVGA: clgd5446: 2883584 bytes off-screen memory available
(--) SVGA: clgd5446: Using hardware cursor
(--) SVGA: clgd5446: Using accelerator functions
(--) SVGA: clgd5446: Using BitBLT engine
(**) SVGA: clgd5446: Using memory-mapped I/O
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: CPU to screen color expansion (bitmap, stipple, TE/NonTE
imagetext, TE/NonTE polytext)
(--) SVGA: XAA: Using 10 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm -m
us -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml
"Errors from xkbcomp are not fatal to the X server" keymap/xfree86
compiled/xfree86.xkm'
grep: /etc/X11/config: No such file or directory
