Has anyone else had problems with diald/pppd since the upgrade?
I'm running:
Kernel 2.2.13ac2
ppp 2.3.10-2
diald 0.99.1-0.1
I've not changed /etc/diald/diald.options (kept my old file)
pppd (via pon/poff) work fine, but when diald calls pppd, things get hosed:
Nov 4 09:31:23 back40 diald[1593]: Unknown option 'reroute'
Nov 4 09:31:24 back40 diald[1594]: start sl0: SIOCSIFMETRIC: Invalid argument
Nov 4 09:31:24 back40 diald[1594]: start sl0: SIOCSIFMTU: Invalid argument
Nov 4 09:31:29 back40 diald[1594]: /tmp/dctrl.1554-2: log level 0x0600017f
Nov 4 09:31:32 back40 diald[1594]: FIFO: force request
Nov 4 09:31:32 back40 diald[1594]: Calling site 10.0.0.2
Nov 4 09:31:34 back40 diald[1594]: connector: +++ATZ
Nov 4 09:31:34 back40 diald[1594]: connector: OK
Nov 4 09:31:34 back40 diald[1594]: connector: AT&F1&M4M0H0
Nov 4 09:31:34 back40 diald[1594]: connector: OK
Nov 4 09:31:54 back40 diald[1594]: connector: ATDTxxx-xxxx
Nov 4 09:31:55 back40 diald[1594]: connector: CONNECT
Nov 4 09:31:55 back40 diald[1594]: Connected to site 10.0.0.2
Nov 4 09:31:55 back40 diald[1594]: Running pppd (pid = 1621).
Nov 4 09:31:55 back40 diald[1621]: Running pppd: /usr/sbin/pppd -defaultroute
-detach modem crtscts mtu 1500 mru 1500 file /etc/ppp/peers/provider-diald
connect
Nov 4 09:31:55 back40 pppd[1621]: defaultroute option is disabled
Nov 4 09:31:55 back40 diald[1594]: start sl0: SIOCSIFMETRIC: Invalid argument
Nov 4 09:31:55 back40 diald[1594]: start sl0: SIOCSIFMTU: Invalid argument
Nov 4 09:31:55 back40 diald[1594]: start sl0: SIOCADDRT: File exists
Nov 4 09:31:55 back40 diald[1594]: start sl0: SIOCADDRT: File exists
Nov 4 09:31:55 back40 diald[1594]: start sl0: SIOCSIFMETRIC: Invalid argument
Nov 4 09:31:55 back40 diald[1594]: start sl0: SIOCSIFMTU: Invalid argument
Nov 4 09:31:55 back40 diald[1594]: start sl0: SIOCADDRT: File exists
Nov 4 09:31:55 back40 diald[1594]: start sl0: SIOCADDRT: File exists
Nov 4 09:31:56 back40 diald[1594]: Disconnect script failed
Nov 4 09:31:56 back40 diald[1594]: Disconnected. Call duration 1 seconds.
Nov 4 09:31:56 back40 diald[1594]: IP transmitted 0 bytes and received 0
bytes.
Nov 4 09:31:57 back40 diald[1594]: Delaying 30 seconds before clear to dial.
Nov 4 09:32:09 back40 diald[1594]: FIFO: reset request received - re-reading
configuration
Nov 4 09:32:09 back40 diald[1594]: Unknown option 'reroute'
The only differences I can see (wrt the previous diald) are:
1) diald seems to have forgotten about `reroute` -- issues an error
2) diald passing `-defaultroute` to pppd, it didn't use to do that
3) diald issuing more messages (CIFMTU) is the only thats was also issued
by the prior release
--
Rick Nelson
C:\WINDOWS C:\WINDOWS\GO C:\PC\CRAWL
