Well, I installed a new kernel in the hopes that my recent sound problems were a result of corrupt modules, but no luck. Same errors. TO recap, here are the errors:
---- loop awe_wave AWE32: not detected modprobe: modprobe: Can't locate module synth0 /dev/sequencer: Device not configured /lib/modules/2.2.13/misc/awe_wave.o: post-install awe_wave failed /lib/modules/2.2.13/misc/awe_wave.o: insmod awe_wave failed Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 SB 4.16 detected OK (220) SB16: Bad or missing 16 bit DMA channel YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 ---- Any ideas on what to try next? Should I try another module? Am I missing one? Here's what I have selected (according to modconf): awe-wave, opl3, sb, sound, soundcore, soundlow. Should I select uart401? Deselect opl3? It's not a hardware problem. My mandrake partition has no problems whatsoever. Should I try upgrading/reinstalling another package outside of the kernelspace? I was about to include the isapnp config message from boot time, but it didn't make it into /var/log/messages. Any idea where that might show up? It was detected without any errors that I noticed, anyway. If it'll help: I'm running Debian Potato, 2.2.13, SB AWE64. Thanks, -Chris __________________________________________________ FREE Email for ALL! Sign up at http://www.mail.com