Hello and good afternoon,
I am lost !!!
Please help !!!
I have tried again to install Debian 2.1 but now I have a problem
with the configuration of X and can not do anything.
OK, I have installed the Base and some selected tasks inclusive
XFree86 and fvwm2.
While configuration I have selected the Monitor speed (MAG DX 15 F)
and then my graphic card (miro CRYSTAL 49 sv) which is in the menu
and provided by Linux.
Now when I reboot, it waits very lon at a Font-Server and then if the
bootprocess continuses, the monitor flash 2 times and then they go in
Stand-By mode and shut down.
Now I can use Ctrl-ALT-Del only.
Please can you tell me what is the right Monitor setting and how I
can go into my installation because I must do it with a boot disk now.
Note: I use only the resolution 1024 x 768 x 16.7M
The biggest resolution is only used if I use my Hitachi 21"
and then with 1408 x 1024 x 65k
MAG DX 15 F
===========
640 x 480 (256) 51.4 kHz 100.0 Hz
640 x 480 (32k) 51.4 kHz 100.0 Hz
640 x 480 (65k) 51.4 kHz 100.0 Hz
640 x 480 (16.7M) 51.4 kHz 100.0 Hz
800 x 600 (256) 63.4 kHz 100.1 Hz
800 x 600 (32k) 63.4 kHz 100.1 Hz
800 x 600 (65k) 63.4 kHz 100.1 Hz
800 x 600 (16.7M) 63.4 kHz 100.1 Hz
1024 x 768 (256) 60.0 kHz 75.0 Hz
1024 x 768 (32k) 60.0 kHz 75.0 Hz
1024 x 768 (65k) 60.0 kHz 75.0 Hz
1024 x 768 (16.7M) 60.0 kHz 75.0 Hz
1152 x 864 (256) 62.8 kHz 69.9 Hz
1152 x 864 (32k) 62.8 kHz 69.9 Hz
1152 x 864 (65k) 62.8 kHz 69.9 Hz
1152 x 864 (16.7M) 62.8 kHz 69.9 Hz
1280 x 1024 (256) 63.9 kHz 59.9 Hz
1280 x 1024 (32k) 63.9 kHz 59.9 Hz
1280 x 1024 (65k) 63.9 kHz 59.9 Hz
1408 x 1024 (256) 64.0 kHz 60.1 Hz
1408 x 1024 (32k) 64.0 kHz 60.1 Hz
1408 x 1024 (65k) 64.0 kHz 60.1 Hz
Thanks for your help
Michelle
