I did the mount -t ... /dev/hdx, tried all, none worked. I did later modconf to install the sbpcd, installed nicely, but again didn't let me read my cdrom. What I get is, after a lot of failures of the kind
sbpcd-0 [x]: Diskinfo: Read capacity "y" returns - 602 sbpcd-0[x+1]: CD contains no data tracks. sbpcd-0[x+2]: !st-diskok detected-retrying same same sbpcd[x+4]: sbp status: failed after 3 tries end_request: I/O error, dev 19:00, sector 64 isofs_read_super: bread failed, dev 19:00 iso_blknum 16 block 32 mount: wrong fs type, bad option, bad superblock on /dev/cdrom, or too many mounted file systems. My CDrom is not bootable. How long does it take to install from the web with a 28800 bps connection? Do you guys think the problem is with the CDRom, or with the module? Thanks, Antonio. John Carline wrote: > > Also, you probably already know this but just in case you don't .... The > multicd > installation should have Disk 2 in the drive before updating the package > list. In other > words, disk 1 to start and disk 2 for dselect. > > One other thought, if all else fails you can always use dselect with the apt > option and > install via the web. > > Good Luck > > John > > -- > > Powered by the Penguin
