Hello all:
I have what I hope is a quick question. I'm having trouble getting X to
work using the SVGA server with my Trident 3DImage 975 Card. The VGA 16
server works fine, but as you can imagine looks slightly less beautiful
than I would like.
I'm using the X that came with Slink, although I upgraded to potato and
tried the updated X Windows there with similar results. So now I'm back
to Slink. I've read the README files and can find nothing there to help
me.
The quick question is: Has anyone run into this or a similar problem and
fixed it. If not, then here's the output:
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs,
tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i,
tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426,
clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077,
oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401,
cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge,
s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200,
ct64300, generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc102)"
(**) XKB: geometry: "pc"
(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Trident 3DImage975"
(**) SVGA: Monitor ID: "Spectrum 7 Vlr"
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75
dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts
/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X1
1R6/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: Trident 3DImage975 rev 243, Memory @ 0xf4800000,
0xf4100000
(--) Trident chipset version: 0xf3 (3DImage975)
(--) SVGA: Revision 0.
(--) SVGA: Using Trident programmable clocks
(--) SVGA: chipset: 3dimage975
(**) SVGA: videoram: 4096k
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 230.000 MHz
(**) SVGA: Mode "640x480": mode clock = 45.800
(**) SVGA: Mode "1280x1024": mode clock = 110.000
(**) SVGA: Mode "800x600": mode clock = 69.650
(**) SVGA: Mode "1024x768": mode clock = 85.000
(--) SVGA: Virtual resolution set to 1280x1024
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: Using Linear Frame Buffer at 0x0f4800000, Size 4MB
_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno 3): Server error.
I notice that it is detecting the card up top, but then the lines with
(--) followed by my card name later. It seems to be eliminating the
modes outside my monitor's ranges (30-70H 50-130V), which is good, but
I confess to being ignorant about what much of this output means.
Any help would be gratefully appreciated, and thanks at least for reading
this far.
Nathan Smith
