Hi list!
I have some serious trouble using my Epson GT5000 scsi scanner. I use it with
an aha1510b ISA adapter (aha152x-driver). There are two harddisk attched
internally, one is active terminated. The scanner is attached via a 1m long
hd50->centronics cable and on the sub-d25 port of the scanner i attached an
active terminator. Then i tried to scan with xsane. the preview was no problem,
but when i tried to do the full scan, it stopped after doing half of the scan
and i had to kill xsane manually. A minute later the whole system was halted.
no more reactions to keyboard events, network accesses, anything but the
resetbutton :-((
So i attached the scanner to my other box, equipped with an Advance
2941UW-controller (SYM53C8XX-driver), via a hd86->Centronics cable. and scanning
was no problem at all.
Both boxes run up-to-date potato-dist, so i think the only different sw involved
is the scsi-driver.
Any ideas are appreciated. TIA
Stefan Bunse
<==============================================================================>
If you wanna contact me for any reason, do it!
You'll reach me at:
mailto: [EMAIL PROTECTED]
ICQ#: 21753787
Phone: ask me :-)
fortune of the day:
Beware of bugs in the above code; I have only proved it correct, not tried it.
-- Donald Knuth
<==============================================================================>
<==============================================================================>
If you wanna contact me for any reason, do it!
You'll reach me at:
mailto: [EMAIL PROTECTED]
ICQ#: 21753787
Phone: ask me :-)
fortune of the day:
Beware of bugs in the above code; I have only proved it correct, not tried it.
-- Donald Knuth
<==============================================================================>
