Hello, I just installed Woody from my system (it was running SID before), the problem I have is I can't get dhcp working. It worked just fine on Sid before. I used the same /etc/resolved.conf /etc/network/interface files.
The problem seems to be from this line in /etc/network/interface #iface eth0 inet dhcp when I run ifconfig, eth0 was never brought up. I also looked at /var/log/daemon and no modules seems to be missing at all. I also run win2k on this system and it can request the ip address from dhcp just fine. Is there anything else I should check ? Or is there any possible package, modules in the kernel that I missed ? This is my /etc/network/interfaces ################################################################ # The loopback interface auto lo iface lo inet loopback # The first network card - this entry was created during the Debian installation# (network, broadcast and gateway are optional) auto eth0 #iface eth0 inet static # address 192.168.0.2 # netmask 255.255.255.0 # network 192.168.0.0 # broadcast 192.168.0.255 # gateway 192.168.0.1 iface eth0 inet dhcp ################################################################ Thanks in advance. -- ThanhVu Nguyen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
