I have 2 PCI Planex ethernet cards in my machine, the first uses "tulip.c" as its driver, and the second uses "de4x5.c".
When I inserted the second card today and rebuilt my kernel (no modules), during boot-time initialization the tulip driver initializes successfully as eth0, but the second driver fails with:- eth1: region already allocated at 0xe400 because that I/O port was grabbed by the tulip driver. Is there a way around this, or can I not use these two cards in the same machine? I can't see any jumpers or switches that might change either I/O port on the cards. Cheers, Neil.
