> i got a Yamaha sound card but I can't manage to load sound as a module,
> because i don't know exactly which card it is... Is there a way to get
> the irq, dma, and such things it uses ? I also run NT but I neither can
> find these informations there...
Hi!
Well... it seems it is either a on-board card that uses a Yamaha chipset or
a 'SB
compatible' that uses the OPL3-SA? chipset (where ? can be 1,2 or x - chipsets
code
YMF 771, 715 & 719, respectively). The latter ones are easily supported by Linux
using the OPL3-SAx PnP module... To find out what you should try, there's two
tools:
1) For ISA cards, try using pnpdump... the best way to use it is to redirect
it's
output to a file (eg. '$pnpdump >isapnp.conf.tst') and then use this file as an
input
to isapnp (for that purpose, copying that file as /etc/isapnp.conf should be
enough).
2) For PCI boards, try 'cat /proc/pci'...
And good luck!
Guilherme Zahn
