On Mon 08/30/99 06:28AM, Andrew Clark wrote:
> Has anyone had any success getting an SB16 (Vibra 16 really) PnP to work with
> debian, I tried configuring the kernel with the same options that CTCM
> displays when you run it, then booting to DOS, running CTCM and then booting
> linux via loadlin (with and without sound=0x6220933)
>
> Any help would be apreciated (even if it is just to tell me to rip the non-PnP
> SB16 original out of my other machine)
>
For PNP cards you also need to set up an /etc/isapnp.conf file. man
isapnp and man pnpdump. You'll need to edit the /etc/isapnp.conf
file you get for your card's settings (io, irq, and dma). If you
don't know them, and you have windows installed, you can get them
from My Computer > Device Manager (or some such way).
I don't have sound on this computer (too lazy :) ), but there's a
lot of info in the archives and people more knowledgable than I.
Good Luck
--
( __ _
Mark Wagnon ) Debian GNU/ -o) / / (_)__ __ ____ __
Chula Vista, CA ( /\\/ /__/ / _ \/ // /\ \/ /
[EMAIL PROTECTED] ) www.debian.org _\_v____/_/_//_/\_,_/ /_/\_\
