Hi,
As for your second NIC, you might try the append command in your
lilo.conf like so:
append="ether=11,0x300,eth0 ether=10,0x240,eth1"
^^^^^^^^ ^^^^^^^^
where the underscored values are your NICs' irq and io addresses.
I am having problems getting dhcpcd up and running on my system
too. ifconfig shows no IP for eth0.
I discovered that the dhcpcd package is supposed to contain two
different versions of dhcpcd--one for 2.0.x kernels and the other
for 2.1.x (will work for the older kernels too). But I can't seem
to get it work.
>From what I've read, your edit to the config file looks like it
should work.
Hopefully someone will shed some light on this.
--
( __ _
Mark Wagnon ) Debian GNU/ -o) / / (_)__ __ ____ __
Chula Vista, CA ( /\\/ /__/ / _ \/ // /\ \/ /
[EMAIL PROTECTED] ) www.debian.org _\_v____/_/_//_/\_,_/ /_/\_\
