-----BEGIN PGP SIGNED MESSAGE-----
Rupert,
I assume that you are running Slink. Have to installed the upgrade
versions of the packages that are required for your to be running the
2.2.x kernels? I belive the net-tools package is one of the packages that
need to be ugraded, so I am not at all surprised to hear that networking
is failing for you.
There is a URL available somewhere on the Debian website which
tells you about the packages that need to be upgraded. Unfortunately, I do
not have a URL handy - so you'll have to search.
Regards,
Jor-el
Everywhere I go I'm asked if I think the university stifles writers. My
opinion is that they don't stifle enough of them. There's many a bestseller
that could have been prevented by a good teacher.
-- Flannery O'Connor
On Mon, 2 Aug 1999, Rupert Brooks wrote:
> Hi,
>
> I have configed and compiled both the 2.2.10 and 2.2.5 kernels, and my
> ne2000 clone PCI ethernet card does not work with either.
>
> With my 2.0.34 kernel, the card worked fine. The module ne2k-pci loaded
> without a hitch and dhcpcd configured the ip information flawlessly. (
> I use an ADSL connection which requires DHCP to be used to set up the IP
> address.)
>
> I have tried both kernels with NE2000 support compiled in. In this
> case, the card appears to be recognized on startup, but DHCPCD does not
> create new files when it runs. DHCPCD does not report any errors
> either. ifconfig without arguments shows the loopback device. Ifconfig
> listing all devices lists the eth0 device and it looks ok, but none of
> the IP information is configured. Note that I have also used dhcpcd
> eth0 to try and force dhcp to use the ethernet card.
>
> If I configure the kernel to use loadable module support for the
> ethernet card, then the module ne2k-pci won't load. When using insmod
> to try to load it, it will complain aboutn several symbols not being
> resolved. From their names they look like the ethernet card hooks in
> the kernel.
>
> After that lengthy description - I have a couple questions
>
> Does anyone out there have a ne2000 PCI ethernet card working under a
> 2.2.x kernel?
> If so, did you have to do anything wierd to get it to work?
> I am not sure what is not working, because there have been so few error
> messages. Can anyone recommend some diagnostic tests?
>
> TIA
>
> Rupert Brooks
>
>
>
>
>
> --
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
>
>
-----BEGIN PGP SIGNATURE-----
Version: 2.6.3a
Charset: noconv
iQCVAwUBN6boavrE9j2ZpWNBAQHr7wQAhRVXTfZcyb+oRJegJ/K7BOOT+mS06H8+
Ptmz35+BkgSJddrYScmO/8bxzZHNoinhVDd2KwPfYEnJQFvIf2thP40rqXj4wJA8
w5/AIQJvDaOtxg98g09qquHRH57rbBcyVE0bJCLC+l9qJiYzPjSxmD3RHvOKtZlL
P7WQVXUVi0M=
=WzBR
-----END PGP SIGNATURE-----
