> I ran pppconfig and finally thought I was getting somewhere, however when > I finished and then typed "pon" nothing happened (as before).
Post the complete outputs of 'plog' and 'setserial -a /dev/ttyS1' . > I have to modprobe ppp every time I reboot else pon says the kernel lacks > support for ppp. Are you using the distributed kernel or one you compiled? If the latter, you probably failed to select ppp. If the former, you have probably hosed up your modules stuff somehow. > Also, I have to change the port the modem is on using setserial (from > 0x02f8 to 0x100) else it won't enable the modem. You didn't mention that before. What do you mean by "won't enable the modem"? Please tell us exactly what commands you are giving and the exact and complete reponses. Post the output of 'setserial -a /dev/ttyS2' both before and after you change the base address. > Then i make sure isapnp /etc/isapnp.conf is running at startup. What do you mean by that? isapnp should run, complete its task, and exit. Also, I think that you probably don't want to change the base address and also use isapnp. > Does this info help? More information always helps. -- John Hasler [EMAIL PROTECTED] (John Hasler) Dancing Horse Hill Elmwood, WI
