On Fri, Jun 18, 1999 at 02:45:47PM -0500, Kent West wrote: > I searched the archives for this, and found the same problem, but no > answer. > > I've lost my network card on a 2.0.36 installation. It's a 3C509B card, > and on boot-up I see the error "Symbol for parameter io not found". > After logging in I can do an "insmod 3c509" and the card appears to be > recognized (but I don't know how to get the network started now that the > card is....). Check your /etc/modutils/aliases for a line like "options 3c509 io=xxxx", remove it, and run update-modules. > > 1] How do I fix the boot-up problem? > > 2] How would I start the network after starting the NIC manually? /etc/init.d/network should be it. If you have a DHCP assigned IP (like me), then also do /etc/init.d/dhcpcd-sv. > > Thanks. > > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > >
-- Stephen Pitts [EMAIL PROTECTED] webmaster - http://www.mschess.org
