"Andrew C. Gronosky" wrote: > Hi, > > My new PC has a Creative AWE64 card and I've been pulling my hair out > trying to configure it. :) I am running the 2.2.1 kernel with all the > correct modules according to the kernel documentation. The card is PnP > and I believe I have it configured properly with isapnp. > > /lib/modules/2.2.1/misc/soundcore.o: invalid parameter io > soundlow: No such file or directory > > Installation failed. > > Now I've looked around a bit and my /etc/conf.modules looks very odd.
I dont know what your problem is with the modules(1), but can't you look at the time/date stamp? 1. OK I have just had a look through your files. isapnp.conf looks OK, but [and I could well be wrong] conf.modules seems to have a few rogue options. options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330 options sound io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330 options uart401 io=0x220 irq=5 dma=1 dma16=5 options soundcore io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330 options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330 options sb sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330 options sound io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330 options uart401 io=0x220 irq=5 dma=1 dma16=5 options sound io=220 irq=5 dma=1 dma16=5 mpu_io=330 options sound io=0x220 options sound io=0220 options sound io=0x220 irq=5 dma=1 dma16=5 mpu_io-0x330 options soundcore io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330 options sound options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330 options soundlow io=0x220 Are you using modconf to install the modules? If so, then hopefully what I have pasted in should be the contents of /etc/modutils/modconf. this is mine, for comparison: options sb io=0x220 irq=5 dma=0 dma16=5 I have an SB16 Value PNP (cos I'm poor) and I think that our options for the sb module should be similar. If you use modconf, then move the old /etc/modutils/modconf file elsewhere [to a different directory, dont just rename it modconf.old or sthg cos update-modules puts the contents of all the files into /etc/conf.modules] and either run modconf again, or put into your /etc/modutils/modconf "options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330" If you are using modconf, then also consider filing a bug against it. If OTOH you do not use modconf, then find out where those dodgy options are coming from [a file in /etc/modutils almost certainly] and put in that file what I told you above to put in /etc/modutils/modconf frankie > > It seems to have redundant entries (see attached). Can anyone tell me > how conf.modules went bad and how I could fix it? Running > update-modules does not help. > > I've also attached my isapnp.conf file for completeness. > > Thanks, > > -Andrew Gronosky > > -- ,-----------------------------------------------------------------------------. > Frankie | Drum'n'Bass tunes, samples and links. < > [EMAIL PROTECTED] | http://www.skunkpussy.freeserve.co.uk/ < `-----------------------------------------------------------------------------'
smime.p7s
Description: S/MIME Cryptographic Signature
