Hi Horacio, I usually clean my module directory before I reinstall the the kernel modules to get rid of old stuff in there. But beware: If you are using PCMCIA or VMWARE, you will need to reinstall the PCMCIA and VMWARE modules.
After I install my modules using make modules_install I run depmod -a This tells modprobe which modules depend on each other. I also install the kernel using a small shellprogram provided (you will need to switch that to executable using chmod +x) The last thing I do is that I run lilo. My procedure: make bzImage make modules # rm -rf /lib/modules/2.2.5 # Only if you are very sure about this! make modules_install depmod -a cd arch/i386/boot ./install.sh 2.2.5 bzImage ../../../System.map / lilo Alex. On Tue, 11 May 1999, J Horacio MG wrote: > I just recompiled kernel 2.0.36, and everything seems to work fine > except for the following messages during boot up (same with modprobe). > pon seems to be working ok so, what does all this mean? > > :~# modprobe ppp.o > /lib/modules/2.0.36/net/ppp.o: unresolved symbol netif_rx_R88a5d1d7 > > Is there anything else I should do after: > make mrproper > make config > make dep > make clean > make zImage > make modules > make modules_install? -- Alexander Schwartz ([EMAIL PROTECTED]) http://ourworld.compuserve.com/homepages/alex_schwartz
