On Wed, 28 Apr 1999, Nissim Karpenstein wrote:
Hi Nissim,
Check out your /etc/ppp/options
disable proxyarp, it worked for me.
>
>I'm having some trouble setting up diald. I put the defaultroute option
>in the diald.options file, but after running diald, the slip connection
>is not being set up as the default route. Here is the setup
>information:
>
>/etc/diald/diald.options:
>accounting-log /var/diald/log
>mode ppp
>two-way
>dynamic
>local 10.0.0.1
>remote 10.0.0.2
>reroute
>defaultroute
>device /dev/ttyS0
>connect "/usr/sbin/chat -v -f /etc/ppp/ppp.chat"
>modem
>speed 115200
>crtscts
>connect-timeout 30
>dial-fail-limit 5
>fifo /var/run/diald.fifo
>
>/etc/ppp/ppp.chat:
>TIMEOUT 3 \
>ABORT '\nBUSY\r' \
>ABORT '\nNO ANSWER\r' \
>ABORT '\nRINGING\r\n\r\nRINGING\r' \
>''
>\rAT \
>'OK-+++\c-OK' ATH0 \
>TIMOUT 30 \
>OK 'AT *v2=5 s69.5=1 *p=3 *d0=1' \
>OK 'ATDT8129147' \
>CONNECT ''
>
>/etc/ppp/options:
>lcp-echo-interval 30
>lcp-echo-failure 4
>debug
>noipdefault
>
>after running diald -- /var/log/messages:
>Apr 27 11:19:09 prophet diald[2500]: Using fifo /var/run/diald.fifo
>Apr 27 11:19:09 prophet diald[2500]: Starting diald version 0.16.5
>Apr 27 11:19:09 prophet diald[2500]: Proxy device established on
>interface sl0
>Apr 27 11:19:09 prophet diald[2500]: Setting pointopoint route for sl0
>Apr 27 11:19:09 prophet diald[2500]: Establishing routes for sl0
>Apr 27 11:19:09 prophet diald[2500]: proxy arp: scanning 2 interfaces
>for IP 10.0.0.2
>Apr 27 11:19:09 prophet diald[2500]: proxy arp: examining interface lo
>Apr 27 11:19:09 prophet diald[2500]: proxy arp: examining interface sl0
>Apr 27 11:19:09 prophet diald[2500]: Changed snoop device to sl0
>Apr 27 11:19:09 prophet diald[2500]: Diald initial setup completed.
>
>after running diald -- output of route -n :
>Kernel IP routing table
>Destination Gateway Genmask Flags Metric Ref Use
>Iface
>10.0.0.2 0.0.0.0 255.255.255.255 UH 1 0 0
>sl0
>127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0
>lo
>0.0.0.0 0.0.0.0 0.0.0.0 U 1 0 2
>sl0
>
>
>Shouldn't there be a G in the flags next to the bottom one?
>Does anyone know why it's not working?
>
>AdThanksvance
>
> -Nissim
>
>
>
>--
>Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
--
Cheers,
Colin Tree
