*- On 15 Apr, David Nelson wrote about "Re: X windows and ModeLines"
> 1) You won't get anything out of the mouse wheel. Don't think anyone
> wrote a special driver for it, so...
>
Wrong.
>From 'man XF86Config'
ZAxisMapping N M
Some mouse devices have a wheel or a roller. Its
action is reported as the Z (third) axis movement
in the X server. The Z axis movement can be
assigned to another axis (X or Y) or a pair of
buttons (the button N for negative movement and M
for positive movement) with this option.
and from my XF86Config
Section "Pointer"
Protocol "MouseManPlusPS/2"
Device "/dev/psaux"
SampleRate 133
Resolution 200
Buttons 6
ZAxisMapping 4 5
EndSection
Then have a look at the imwheel package
Package: imwheel
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 77
Maintainer: Tom Lees <[EMAIL PROTECTED]>
Version: 0.9.5-1
Depends: libc6, xlib6g (>= 3.3-5)
Conffiles:
/etc/X11/imwheel/imwheelrc a67c5ef39af267efdee7cc534ba662b1
Description: Program to support the "wheel" on some new mice
Various new mice, including the Microsoft IntelliMouse, and the
Logitech MouseMan+, Wheel Mouse, and others, now have a "wheel"
button in the middle of them. This wheel button acts both as a
standard button (by pressing it), and a wheel, which under MS
Windows may be used for scrolling windows around.
.
This program supports the wheel scrolling operation by one of
two means:
1. Some newer X servers support mapping the wheel to buttons
4 and 5, which imwheel then captures and supports,
2. Using a patched version of gpm, the normal mouse events are
passed on to the X server through /dev/gpmdata (gpm's standard
"repeater" mode), and in addition wheel events are sent to another
pipe, /dev/gpmwheel. imwheel picks up these events, and translates
them.
or http://www.inria.fr/koala/colas/mouse-wheel-scroll/
Brian
>
> Small, Bradley wrote:
>>
>> Well I finally got X windows to come up. Kind of stark and doesn't
>> do much :) I guess I must install other packages to make it actually
>> interesting.. But I digress. The question is this: after finally getting to
>> run the right server and XF86Setup and xf86config and all that jazz.... I am
>> left with a system that seems only to be able to run 640x480 and 800x600.
>> Now I know that both this card and monitor are capable of running 1280x1024
>> (though not necessarily together as the best I can do in Windows98 is
>> 1024x768 with lots of colors...)
>>
>> What do I need to go forward from here?
>>
>> The chipset is SiS 5597/5598 with 2048 MB memory and
>> The monitor is a DB-1765BA near as I can tell. It is autodetected by
>> Win98 as a (Delta DB-1765) and the driver it chooses says that it has an
>> hrange of 30-65 and a vrange of 50-100. Funny thing though it seems to be
>> running 1024x768 under Win98 at 75....
>>
>> Also I have a mouse with the wheel and stuff, however XFree only
>> wants to call it a PS/2 mouse. How do I get some use form the wheel?
>>
