cat interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

auto eth1
iface eth1 inet static
        address 192.168.1.1
        netmask 255.255.255.0
        network 192.168.1.0
        broadcast 192.168.1.255


edit /etc/init.d/dhcp
# Defaults
INTERFACES="eth1"


Larry Hunsicker wrote:
Another couple of questions, folks:

I have a system with two NICs, one pointing outward to a cable modem
that needs to be set up with DHCP, and one pointing inward to support my
home network that I configure with static IP addresses. I have gotten
and installed dhcp3-client.

Two questions:

How do I get DHCP initialized; i.e., how do I get the dhcp-client files
installed into the init.d and rc*.d files?

How do I assure that the first NIC is configured by DHCP, but the other
one with static ips?

Many thanks in advance to any help you all can give me.

Larry Hunsicker



--
=================================================================
= Management is doing things right; leadership is doing the =
= right things. - Peter Drucker =
=_______________________________________________________________=
= http://www.sun.com/service/sunps/jdc/javacenter.pdf =
= www.sun.com | www.javasoft.com | http://wwws.sun.com/sunone =
=================================================================


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to