On Wednesday 01 January 2003 21:23, Martin McCormick wrote: > According to the documentation for USB, the drives that > should show up on your system are /dev/sda or /dev/sdx if you > already have a /dev/sda or /dev/sdb, etc. > In other words, the USB devs should start at one above any pre > existing SCSI disks. > > This means that your /dev/scd0 should not conflict with > any of the USB-based SCSI emulations.
You are right. Changed scd0 to scd2, but nothing changed, and USB programs still can't detect USB devices. Cheers Aryan > "Charlie Reiman" writes: > >> -----Original Message----- > >> From: Aryan Ameri [mailto:[EMAIL PROTECTED]] > >> Sent: Tuesday, December 31, 2002 10:25 AM > >> To: debian users > >> Subject: IDE SCSI Emulation and USB problem > >> > >> > >> Hi there: > >> > >> In order to be able to burn CDs using my ATAPI DVD/CDRW drive, I did the > >> followings to get ide-scsi emulation working. > >> > >> I first loaded the ide-scsi module using modconf. > >> Then Added the following lines to /etc/modutils/actions > >> > >> "alias scd0 srmod > >> alias scsi_hostadapter ide-scsi > >> options ide-cd ignore=hdc" > >> > >> Then added the following line to /etc/lilo.conf right after the > >> "root=" line > >> > >> "append="hdc=ide-scsi" > >> > >> I rerun lilo, then rebooted and changed /etc/fstab to mount > >> /dev/scd0 instead > >> of /dev/cdrom. > >> > >> I thouht that was it, I started burning CDs, and everything was > >> OK, untill I > >> saw that I have two problems > >> > >> 1. My USB programs can't detect USB devices, e.g gtkam can't > >> detect my digital > >> camera, and my mp3 player program can't detect my mp3 player. > > > >Most USB devices that act as filesystems use a SCSI emulation layer as > > well. I believe it also defaults to using /dev/scd0. You might want to > > try changing the IDE device to a different /dev/scd file. > > > > > >-- > >To UNSUBSCRIBE, email to [EMAIL PROTECTED] > >with a subject of "unsubscribe". Trouble? Contact > > [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
