Thanks for the reply Andrei... Unfortunately it is a PNP card and I do not have windoze on the system to get the port numbers from.
As for my kernel, when I tried to make it, it asked me a ton of questions and didn't seem to have any defaults in it at all. I ended up specifying the things I thought I needed, but obviously I didn't know what I was doing... :) I have played with isapnptools but I got completely confused when I was trying to edit the DUMP output. I don't want to screw up my system... Any ideas on how I should proceed? Thanks, Doug Andrei Ivanov wrote: > > Next get into the /usr/src/linux dir and type make xconfig. > > Then do each of these: > > click on Sound > > click y for Sound card support > > click y for Sound Blaster (SB, SBPro, SB16, clones) support > > scroll down a little ways > > click y for /dev/dsp and /dev/audio support > > click y for MIDI interface support > > click y for FM systhesizer (YM3812/OPL-3) support > > enter your I/O base address for I/O base for SB... [I entered 220] > > This value here is the first IO base that you get in Windows/Resources > window for your sound card. The second IO base value will work for MPU401. > > > enter yor IRQ for Sound Blaster IRQ... [5] > > Err...be careful here. IRQ5 seems to be a very desired IRQ, and many > things tend to > grab it. I know on my machine, in Windows, it was conflicting with NIC, > and in Lin. I have my PnP modem on irq5. So, make sure first by > cat /proc/interrupts > that you don't have an IRQ taken already. > > > enter your DMA for Sound Blaster DMA... [1] > > enter other DMA for Sound Blaster 16 bit DMA... [1]*** > > Windows tell you the second DMA. > > > enter your MPU for MPU401 I/O base... [330]*** > > Put the second IO range that you get from Windows here. > > > enter -1 for SB MPU401 IRQ... [-1]*** > > scroll all the way down (leaving all other entries alone) > > enter 65536 for your Audio DMA buffer size > > that's it! > > Save, exit, and recompile and you should be golden! > > > > But I'm wondering what you put in that kernel of yours....1.6M? > Anyway, like Mark pointed out, just click Y for SB support, and such, as > described up there. > > And I hope it's not a PnP card either. > > Andrew > > --------------------------------------------------------------------------- > Andrei S. Ivanov > [EMAIL PROTECTED] > UIN 12402354 > http://members.tripod.com/AnSIv
