Hello all. I gave up on Hamm a few months ago but with Slink almost ready I thought I'd give it another go. I've since rebuilt my system and now have FIC 503+ motherboard with an AMD 300mhz processor.
I've run the setup DOZENS of times and pretty much had the install process down to a science. Now I'm having a problem installing my PCI Linksys NIC. It uses the NE2000 driver which requires the IO and IRQ parameters to be specified. From Windoze I've verified the IRQ is 9 and the IO is 6C00. After entering the values (io=0x6C00 irq=9) the system hangs. I'm not exactly sure what I'm doing wrong this time. Any suggestions? BTW - I really don't intend to use Hamm I simply wanted to test my new configuration and get back into the swing of things in anticipation of Slink. So it's not critically that I get things working but it would help me out quite a bit. Hopefully I'll be able to compile a working kernel with Slink (I won't even count the number of failed Hamm attempts). Best wishes and thanks in advance. Cristov Russell [EMAIL PROTECTED]
