Hey there everybody,
I've decided to try and figure out a problem (with y'alls help!) that
has bugged me since the days of Bo - setting up my X video. I've tried
reading all of the documentation, but to no avail. Here's my situation:
At 8 bpp, I have no problems (except the normal lame-looking color
dithering)...
At 16 bpp and higher, everything looks good EXCEPT for a thin (roughly
1/2") vertical stripe of the screen (about 3" from the left side, going
from top to bottom) that kind of "shimmers" whenever letters or pictures
are positioned immediately over it (it can't be seen against a "normal"
background....)
Here is some crucial setup info:
Sceptre P73 17" monitor
from the manual:
Horizontal: 30-70
Vertical: 50-120
Video bandwidth: 100MHz
Max resolution: 1280x1024
I found a webpage with some info about this monitor...
it says Horizontal of 24-66 - I put this in the config file and it seems
to work a LITTLE better)
it also says video bandwidth is 110MHz
it also says max resolution is 1280x1024 @ 60Hz, and max flicker-free is
1024x768 @ 76 Hz
>From the config file:
Section "Monitor"
HorizSync 24-66
VertRefresh 50-120
Modeline "1024x768" 85.00 1024 1032 1152 1360 768 784 787 823
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -hsync -vsync
EndSection
Section "Device"
BoardName "ATI Pro Turbo+PC2TV, 3D Rage II+DVD"
EndSection
Section "Screen"
Driver "Accel"
DefaultColorDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600"
EndSubSection
EndSection
ATI 3d Rage II+DVD w/ 4MB video memory
Info from Win'95 video (which runs fine):
1152x864
32bpp
Horiz: 45.9
Vert: 47
refresh rate: 47 Hz
THANKS IN ADVANCE! THIS IS THE LAST THING NEEDED TO HAVE MY SYSTEM
RELATIVELY TROUBLE-FREE!
Rich
