[ problems running a Viper 330 on debian 2.0 ]
> (--) VGA16: PCI: NVidia/SGS-Thomson Riva128 rev 16, Memory @
> 0xf5000000, 0xfc000000
> (--) VGA16: chipset: generic
> (**) VGA16: videoram: 4096k (using 4096k)
> (--) VGA16: clocks: 25.19 28.32 28.32 28.32
> (--) VGA16: Maximum allowed dot-clock: 90.000 MHz
> (--) VGA16: There is no defined dot-clock matching mode
> "1024x768"
> (--) VGA16: Removing mode "1024x768" from list of valid modes.
> (--) VGA16: There is no defined dot-clock matching mode "800x600"
^^^^^
THERE
You are running the XF86_VGA16 server. You should run the XF86_SVGA
server. Make sure the xserver-svga package is installed, then edit the
first line of /etc/X11/Xserver so that it contains the path name of the
svga server, like `/usr/X11R6/bin/XF86_SVGA'. Then if you run startx,
you should get the xserver running. I found this kind of installion
error quite often, I suppose the installation procedure could use some
`streamlining' here.
HTH,
Eric
--
E.L. Meijer ([EMAIL PROTECTED]) | tel. office +31 40 2472189
Eindhoven Univ. of Technology | tel. lab. +31 40 2475032
Lab. for Catalysis and Inorg. Chem. (TAK) | tel. fax +31 40 2455054
