|It sounds like you just don't have sound.
I confirmed that if the jack is pulled out of the Epox 8KHA+ 'speaker'
jack in the manual's photo, and stuck into a radio, there is sound.
|First make sure you're in the audio group ("<become_root> addgroup dan
|audio" - then log out and back in as "dan" -- type "groups" to verify
|you're in the audio group).
or even as root, no sound.
|Second, kill X (for now), and make sure you don't have any sound daemons
|(esd, artsd) running.
I thought init 3 would kill x. well, i had to do init 1. then i did
the tests as root. same deal. Anyways, a pstree shows no sound
related things running. i use icewm BTW.
|Use "splay <some_MP3_file" to play an MP3. If you don't hear anything,
|fire up "aumix"; you'll see two columns. The left-hand side is the
|volume level for the different input/output devices; bring them all up
|to 75% or better with the arrow keys. Then tab over to the second column
|and hit the 5 on the numeric keypad to center the balance on each
|device. You should now be hearing your MP3.
i even used mpg321... all act nice but no sound. looking in syslog,
kernel: Via 686a audio driver 1.9.1
ac97_codec: AC97 Audio codec, id: 0x414c:0x4710 (ALC200/200P)
via82cxxx: board #1 at 0xE400, IRQ 12
via82cxxx: timeout while reading AC97 codec (0x9A0000)
via82cxxx: timeout while reading AC97 codec (0x9A0000)
via_audio: ignoring drain playback error -512
i will now get the via-audio-diag from the sourceforge's via82cxxx package...
--
http://jidanni.org/ Taiwan(04)25854780
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
