Hello, I have installed debian 2.0 on my pentium-11 pc, along with Windows NT 4.0 The machine has an internal modem AOpen FM-56H (Rockwell Chipset)and is using COM3 port for Windows NT. I can't check the IRQ on NT because the Advace button in the setting of ports dialog box is grayed out. I remember that COM3 port was created automatically when i was installing the driver for modem under NT
Under debian linux, i have configured the ports as fallows: (o/p of 0setserial) /dev/ttyS0 at 0x03f8 (irq=4) is a 16550A /dev/ttyS1 at 0x02f8 (irq=3) is a 16550A /dev/ttyS2 at 0x03e8 (irq=4) is a 16550A /dev/ttyS3 at 0x02e8 (irq=3) is a 16550A I am using kermit to test the connection with modem. It won't let me set the /dev/ttyS2 or /dev/ttyS3 port for serial connection. I get the following message C-Kermit>set line /dev/ttyS2 /dev/ttyS2 is not a terminal device. .... can not open /dev/ttyS2 (Same for /dev/ttyS3) I also tried using /dev/ttyS0 and /dev/ttyS1 for connection, and it hangs. C-Kermit>set line /dev/ttyS0 ... ... ,, C-Kermit>c connecting to /dev/ttyS0.. .... .... (and now it won't take any input from me, it just hangs. I had to use the escape sequence. What should i try next? any idea(s)? Thanks, -Rakesh ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com
