Hi all,
I just wanted to report a nasty problem with X in
unstable. After about 6h of uptime, it starts to reset
the screen. I have to reboot - restarting X does
nothing.
Here's the tail of the X log:
(==) Wacom tablet top X=0 top Y=0 bottom X=30480 bottom Y=24060
(==) Wacom tablet top X=0 top Y=0 bottom X=30480 bottom Y=24060
SwitchToMode - scrn: 0 clock: 56300
hdsp: 800 hbeg: 832 hend: 896 httl: 1048
vdsp: 600 vbeg: 601 vend: 604 vttl: 631 flags: 5
Checking against clock: 108000 (108000)
hdsp: 1152 hbeg: 1216 hend: 1344 httl: 1600
vdsp: 864 vbeg: 865 vend: 868 vttl: 900 flags: 5
Checking against clock: 94500 (94500)
hdsp: 1024 hbeg: 1072 hend: 1168 httl: 1376
vdsp: 768 vbeg: 769 vend: 772 vttl: 808 flags: 5
Checking against clock: 56300 (56300)
hdsp: 800 hbeg: 832 hend: 896 httl: 1048
vdsp: 600 vbeg: 601 vend: 604 vttl: 631 flags: 5
SwitchToMode - Succeeded
SwitchToMode - scrn: 0 clock: 108000
hdsp: 1152 hbeg: 1216 hend: 1344 httl: 1600
vdsp: 864 vbeg
vdsp: 864 vbeg: 865 vend: 868 vttl: 900 flags: 5
Checking against clock: 108000 (108000)
hdsp: 1152 hbeg: 1216 hend: 1344 httl: 1600
vdsp: 864 vbeg: 865 vend: 868 vttl: 900 flags: 5
SwitchToMode - Succeeded
SwitchToMode - scrn: 0 clock: 56300
hdsp: 800 hbeg: 832 hend: 896 httl: 1048
vdsp: 600 vbeg: 601 vend: 604 vttl: 631 flags: 5
Checking against clock: 108000 (108000)
hdsp: 1152 hbeg: 1216 hend: 1344 httl: 1600
vdsp: 864 vbeg: 865 vend: 868 vttl: 900 flags: 5
Checking against clock: 94500 (94500)
hdsp: 1024 hbeg: 1072 hend: 1168 httl: 1376
vdsp: 768 vbeg: 769 vend: 772 vttl: 808 flags: 5
Checking against clock: 56300 (56300)
hdsp: 800 hbeg: 832 hend: 896 httl: 1048
vdsp: 600 vbeg: 601 vend: 604 vttl: 631 flags: 5
SwitchToMode - scrn: 0 clock: 108000
hdsp: 1152 hbeg: 1216 hend: 1344 httl: 1600
vdsp: 864 vbeg: 865 vend: 868 vttl: 900 flags: 5
Checking against clock: 108000 (108000)
hdsp: 1152 hbeg: 1216 hend: 1344 httl: 1600
vdsp: 864 vbeg: 865 vend: 868 vttl: 900 flags: 5
SwitchToMode - Succeeded
(==) Wacom tablet model : GD-0912-R00,V1.2-7
(==) Wacom V tablet maximum X=30480 maximum Y=24060 X resolution=2540 Y
resolution=2540 suppress=26 Tilt
Where the heck is the "SwitchToMode" coming from?
Anyone else have these problems with 4.2.1?
- Adam
PS. There is also the quake problem with the 4.2.1 in which the
mouse in quake 3 gets stuck in upper-left corner.
Hardware: ATI Radeon
Kernel: 2.4.19 --- same one that works under all previous X
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
