> I have a scsi controler card in my computer (adaptec 2920 aka
> future-data) already compiled into the kernel
> Can I enable scsi emulation as well to drive an IDE CD-ROM
> burner? Or will the REAL scsi driver and the scsi emulation code duke
> it out leaving fubar behind?
I use an Adaptec 2940U as well as SCSI emulation to drive a PD-CD.
To the system, it looks like I have 2 SCSI interfaces, each with their own
devices.
$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: COMPAQPC Model: ST34371N Rev: 0472
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST31230N Rev: 0594
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: IOMEGA Model: ZIP 100 Rev: D.09
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: COMPAQ Model: PD-1 LF-1195C Rev: A110
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 01
Vendor: COMPAQ Model: PD-1 LF-1195C Rev: A110
Type: Optical Device ANSI SCSI revision: 02
In my case, the restriction is not putting SCSI and SCSI emulation
together, but putting ATAPI CDROM and SCSI emulation CDROM together.
The docs say that if I compile both into the kernel, the ATAPI will win out
over SCSI emulation and will detect the hardware. Haven't tried.
I presume if I put a second CDROM in there, that it will also be detected
by SCSI emulation, but I dunno.
--
Peter Galbraith, research scientist <[EMAIL PROTECTED]>
Maurice Lamontagne Institute, Department of Fisheries and Oceans Canada
P.O. Box 1000, Mont-Joli Qc, G5H 3Z4 Canada. 418-775-0852 FAX: 775-0546
6623'rd GNU/Linux user at the Counter - http://counter.li.org/
