1: I have Linux running on a ACER, with and Advansys SCSI card installed. Now I want to connect a tape station and get access to it - how do I do it?. This I get when I boot:
Sep 16 14:00:38 beluga kernel: Failed initialization of WD-7000 SCSI
card!
Sep 16 14:00:38 beluga kernel: ppa: Version 1.42
Sep 16 14:00:38 beluga kernel: ppa: Probing port 03bc
Sep 16 14:00:38 beluga kernel: ppa: Probing port 0378
Sep 16 14:00:38 beluga kernel: ppa: SPP port
present
Sep 16 14:00:38 beluga kernel: ppa: ECP with
a 16 byte FIFO present
Sep 16 14:00:38 beluga kernel: ppa: Failed
Intel bug check. (Phony EPP in ECP)
Sep 16 14:00:38 beluga kernel: ppa: Probing port 0278
Sep 16 14:00:38 beluga kernel: scsi0 : AdvanSys SCSI 3.1E: PCI Ultra
16 CDB: IO 7000/F, I
RQ 11
Sep 16 14:00:38 beluga kernel: scsi : 1 host.
Sep 16 14:00:38 beluga kernel: scsi : detected total.
2: Just installed two new Siemens-Nixdorff.with a Millinium II AGP graphics card two disks and a Adaptec 2940 SCSI controller. The installation went smoothly and so did the first half hour or so, but then both machines went down with this message:
Aiee: scheduling in interrupt 00125dd9
To get them up again I had to turn the power off and on. Does anybody know what this can be?
Yours
Karsten Bolding
-- ********************************************************************** Karsten Bolding, CEC - Joint Research Centre, ISPRA Direct: +39 (0)332 789314 Space Applications Institute Sec. +39 (0)332 789177 Marine Environment Unit, TP690 FAX: +39 (0)332 789034 I-21020 Ispra(VA) - Italy E-mail: [EMAIL PROTECTED] **********************************************************************