>From a dmesg on our firewall: ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6800, IRQ 10. eth0: PCI NE2000 found at 0x6800, IRQ 10, 00:00:E8:4F:14:B7. ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6c00, IRQ 12. eth1: PCI NE2000 found at 0x6c00, IRQ 12, 00:00:E8:4F:0D:1F.
I repeat, this is with no parameters whatsoever. John Foster Kennedy Mutio writes: > I think I used the ne driver and used the arguments > > io=0x300 and irq=10 > > These are the default values if I remeber correctly. I do recommend using > the HOWTO. > > On Tue, 8 Sep 1998 [EMAIL PROTECTED] wrote: > > > > > We have several of these cards, and they all installed without any > > arguments at all. > > > > > > Alex Kwan writes: > > > My LAN card was NE-2000 PCI (Realtek RTL-8029) > > > How to set up the Command Line Argument on > > > ne2k_pci module? Does anybody has this card too, > > > would you please share your experience with me? > > > > > > > > > Thanks > > > > > > > > > -- > > > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > > > > > > > > > -- > > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > > > > > > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null >
