hello everyone, well here we are again. I have a new pentium II 300 with a ATI-Xpert-XL 4meg AGP2 with 3D and enhanced MPEG. Ok when I tried to run SuperProbe, SuperProbe did not recognize the card. The message that I got was:
Before submitting a report, please make sure that you have the latest version of SuperProbe (see http://www.xfree86.org/FAQ). WARNING - THIS SOFTWARE COULD HANG YOUR MACHINE. READ THE SuperProbe.1 MANUAL PAGE BEFORE RUNNING THIS PROGRAM. INTERRUPT WITHIN FIVE SECONDS TO ABORT! First video: Generic VGA (or unknown SVGA) Now what. I configured XF86Config. As best as i could. I was using the mach64 x-server. This is the output i got from startx. XFree86 Version 3.3.2 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: March 2 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.0.32 i686 [ELF] Configured drivers: Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 0) (using VT number 7) XF86Config: /etc/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3 (**) Mouse: 3 button emulation (timeout: 50ms) (**) Mach64: Graphics device ID: "ati" (**) Mach64: Monitor ID: "superview monitor" (--) Mach64: Mode "640x400" needs hsync freq of 43.27 kHz. Deleted. (--) Mach64: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted. (--) Mach64: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted. (--) Mach64: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted. (--) Mach64: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted. (--) Mach64: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted. (--) Mach64: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted. (--) Mach64: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. (--) Mach64: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted. (--) Mach64: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted. (--) Mach64: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) Mach64: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted. (--) Mach64: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) Mach64: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. (--) Mach64: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. (--) Mach64: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. (--) Mach64: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. (--) Mach64: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. (--) Mach64: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) Mach64: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) Mach64: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) Mach64: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) Mach64: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) Mach64: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) Mach64: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) Mach64: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) Mach64: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) Mach64: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) Mach64: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (--) Mach64: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted. (--) Mach64: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted. (--) Mach64: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted. (--) Mach64: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fon ts/100dpi/" *** None of the configured devices were detected.*** Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages _X11TransSocketUNIXConnect: Can't connect: errno = 111 giving up. xinit: Connection refused (errno 111): unable to connect to X server xinit: No such process (errno 3): Server error. I took a look at the file XF86Config and did not see anything out of the ordinary. here is my XF86Config file, may someone on the list can make head or tails of what is probably the problem. It is probably stareing me right in the face. Thanks for anyone who can help me out. I will see if i can get the straight svga xserver to work in the meantime. Paul
