On Tue, 14 Jul 1998, Bruce Mardle wrote: > > I'm having problems setting up X which I think are due to > > my graphic card settings. I have what I thought was a pretty > > standard card which the drivers are there for. The card has > > a Cirrus CL-GD5446BV with 2 MB of ram. Superprobe identifies > > both ok. I used xf86config to set up the configuration file
I have found a lot of help from the following places. I do not have everything working as expected but it works a little. The problem has to do with Cirrus Logic and not there not being enough people to code their chips in X. Well to cut a long story short see the Xservers documentation on Cirrus Logic and also check the following sites: ----------------------------------------------------------------------------Try specifying chipset clgd5436 in place of 754x. It worked for me on a Gateway Solo2100 laptop with a 7548. Here's my XF86Config: # This file is derived from Gordon Chaffe's ([EMAIL PROTECTED]/Berkeley.EDU) # web page http://bmrc.berkeley.edu/people/chaffee/index.html#xfree86_cirrus # # This works for me with a Cirrus Logic 7548 on a Gateway Solo 2100 Laptop and also http://www.cs.utexas.edu/users/kharker/linux-laptop/ ------------------------------------------------------------------------------ Daniel J. Mashao Electrical Engineering [EMAIL PROTECTED] University of Cape Town http://www.ee.uct.ac.za/~daniel Rondebosch, 7700, S. Africa (w) 27+21+650 2816 (h) 27+21+705 8469 /-------------------------------------------------------------------/ -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
