On Fri, 12 Jun 1998, Dr. Juergen Schnack wrote:
> I am running linux 2.0.30 on a dual pentium II machine. Last friday
> I installed a smc ethernet card using the
> SMC EPIC/100 83C170 Ethernet Controller. The driver epic100, see
> http://cesdis.gsfc.nasa.gov/linux/drivers/epic100.html
> does fine, but the card reports
> Jun 12 07:36:45 obelix kernel: eth0: PCI Bus Error! EPCI status 258801.
>
> Jun 12 07:37:05 obelix kernel: eth0: PCI Bus Error! EPCI status 2588c1.
>
> So, I suspect that the bus error was already there and that the
> new card is the only device that reports the error.
>
> Is there anybody who could give some advise or guess what to do?
Try 2.0.34 ... it has the latest epic100 driver included.
Greg
--
Madarasz Gergely [EMAIL PROTECTED] [EMAIL PROTECTED]
It's practically impossible to look at a penguin and feel angry.
Egy pingvinre gyakorlatilag lehetetlen haragosan nezni.
HuLUG: http://www.cab.u-szeged.hu/local/linux/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
