Hi all!

My IP address is 192.168.37.2
My friends IP addresses are 10.x.y.z
I want to be able to ping them/have them telnet to me etc.

Is doing
route add -net 10.0.0.0 netmask 255.0.0.0 dev eth0
OK or do I need to do something with ifconfig?


At the moment things look like this:

[EMAIL PROTECTED]:~# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
localnet        *               255.255.255.0   U     0      0        0 eth0
127.0.0.0       *               255.0.0.0       U     0      0        2 lo
[EMAIL PROTECTED]:~# route add -net 10.0.0.0 netmask 255.0.0.0 dev eth0
[EMAIL PROTECTED]:~# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
localnet        *               255.255.255.0   U     0      0        0 eth0
127.0.0.0       *               255.0.0.0       U     0      0        2 lo
10.0.0.0        *               255.0.0.0       U     0      0        0 eth0




ifconfig gives me this:

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Bcast:127.255.255.255  Mask:255.0.0.0
          UP BROADCAST LOOPBACK RUNNING  MTU:3584  Metric:1
          RX packets:18 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
             collisions:0 

eth0      Link encap:Ethernet  HWaddr 00:60:08:91:22:CB  
          inet addr:192.168.37.2  Bcast:192.168.37.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
             collisions:0 
          Interrupt:9 Base address:0x300 


Thanks
Ian
-- 
Ian Lynagh - [EMAIL PROTECTED]
http://home.sol.no/~balchen/igloo/

We spend the first twelve months of our children's lives teaching them to walk
and talk and the next twelve telling them to sit down and shut up.


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to