>> May 21 13:15:07 muso pppd[1020]: rcvd [IPCP ConfReq id=0x6 <compress VJ 0f
>> 00> <addr 195.64.64.1>]
>> May 21 13:15:07 muso pppd[1020]: sent [IPCP ConfRej id=0x6 <addr
>> 195.64.64.1>]
>> May 21 13:15:07 muso pppd[1020]: rcvd [IPCP ConfReq id=0x7 <addrs
>> 195.64.64.1 195.64.69.173> <compress VJ 0f 00>]
>> May 21 13:15:07 muso pppd[1020]: sent [IPCP ConfRej id=0x7 <addrs
>> 195.64.64.1 195.64.69.173>]
>> May 21 13:15:07 muso pppd[1020]: rcvd [IPCP ConfReq id=0x8 <compress VJ 0f
>> 00>]
Your machine does not like the other ends idea of ip addresses. See the
ConfRejs.
Are you using static or dynamic ips ? Check out the "noipdefault" option
for ppp.
--j
>> May 21 13:15:07 muso pppd[1020]: sent [IPCP ConfAck id=0x8 <compress VJ 0f
>> 00>]
>> May 21 13:15:07 muso pppd[1020]: ioctl(SIOCADDRT) device route: Network is
>> down(100)
>> May 21 13:15:07 muso pppd[1020]: sent [IPCP TermReq id=0x2 "Interface
>> configuration failed"]
>> May 21 13:15:07 muso pppd[1020]: rcvd [IPCP TermAck id=0x9]
>> May 21 13:15:07 muso pppd[1020]: sent [LCP TermReq id=0x2 "No network
>> protocols running"]
>> May 21 13:15:08 muso pppd[1020]: Hangup (SIGHUP)
>> May 21 13:15:08 muso pppd[1020]: Modem hangup
>> May 21 13:15:08 muso pppd[1020]: Connection terminated.
>> May 21 13:15:09 muso pppd[1020]: Exit.
>>
>>
>>
>>
>> The log for the P90 (stelo) is identical, untill the end:
>>
>> Mar 19 12:09:02 stelo pppd[587]: rcvd [IPCP ConfReq id=0x8 <compress VJ 0f
>> 00>]
>> Mar 19 12:09:02 stelo pppd[587]: sent [IPCP ConfAck id=0x8 <compress VJ 0f
>> 00>]
>> Mar 19 12:09:02 stelo pppd[587]: Cannot determine ethernet address for proxy
>> ARP
>> Mar 19 12:09:02 stelo pppd[587]: local IP address 195.64.69.201
>> Mar 19 12:09:02 stelo pppd[587]: remote IP address 195.64.68.16
>> Mar 19 12:09:11 stelo pppd[587]: Terminating on signal 15.
>> Mar 19 12:09:11 stelo pppd[587]: sent [LCP TermReq id=0x2 "User request"]
>> Mar 19 12:09:11 stelo pppd[587]: rcvd [LCP TermAck id=0x3]
>>
>>
>> Thanks!
>> (Please, also copies to [EMAIL PROTECTED], as I'm not any
>> more subscribed to this list).
>>
>>
>> --
>> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
>> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
