Hi Daniel; unless Mutt is confused, you wrote: > > I have a 486dx4/100 system that has both PCI and VLB on the same board. > I have Caldera currently running on the machine. The SCSI controller on > it is a Adaptec 2840 VLB (Rev E, btw) > > Basically.. it hangs.. and gives errors something like "scsi0 spurrious > intterupt" etc.... I'm using a boot disk that came with my CD from 1.3.1 > rev 6.
This is a known thing, and it happens only on 2842VLB card. The only solution I know of is to have the boot disk reconfigured/ rewritten to use a specially compiled kernel with only AIC77** (the one for the 2842 card) driver and none of the other SCSI cards. I don't know if this is happening with hamm disks... (I had switched over to the different card in the meantime) HTH DamirN -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
