I double checked it and it is mode 600 root.root. Will pppd give a authentication failure if the networking settings aren't configured correctly? I"m trying to do this using ipmasq.. the net-3 howto isn't very detailed, but it does give an example of what I'm trying to do -- lacking all the pppd and hosts/DNS files... :(
-Paul On Tue, 28 Apr 1998, Jens B. Jorgensen wrote: > Check the permissions on /etc/ppp/pap-secrets. I think pppd ignores the file > unless the perms are 600. I'd like to gripe here about the > woeful state of debugging wrt pppd. More than once I've had to strace the > thing to find out what's failing. It could use some better > error messages. > > Paul Miller wrote: > > > When I dialup to my Linux box, it keeps reporting authentication failures > > even though the password is correct.. Here is the ppp.log file (debug 9) > > > > Apr 28 15:28:47 serv1 pppd[28141]: pppd 2.3.3 started by LOGIN, uid 0 > > Apr 28 15:28:47 serv1 pppd[28141]: speed 9 not supported > > Apr 28 15:28:47 serv1 pppd[28141]: Using interface ppp0 > > Apr 28 15:28:47 serv1 pppd[28141]: Connect: ppp0 <--> /dev/ttyS1 > > Apr 28 15:28:47 serv1 pppd[28141]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> > > <auth pap> <magic 0x9aef> <pcomp> <accomp>] > > Apr 28 15:28:50 serv1 pppd[28141]: rcvd [LCP ConfReq id=0x3 <asyncmap > > 0xa0000> <magic 0xa741f25> <pcomp> <accomp> <callback 0x600>] > > Apr 28 15:28:50 serv1 pppd[28141]: sent [LCP ConfRej id=0x3 <callback > > 0x600>] > > Apr 28 15:28:50 serv1 pppd[28141]: rcvd [LCP ConfReq id=0x4 <asyncmap > > 0xa0000> <magic 0xa741f25> <pcomp> <accomp>] > > Apr 28 15:28:50 serv1 pppd[28141]: sent [LCP ConfAck id=0x4 <asyncmap > > 0xa0000> <magic 0xa741f25> <pcomp> <accomp>] > > Apr 28 15:28:50 serv1 pppd[28141]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> > > <auth pap> <magic 0x9aef> <pcomp> <accomp>] > > Apr 28 15:28:50 serv1 pppd[28141]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> > > <auth pap> <magic 0x9aef> <pcomp> <accomp>] > > Apr 28 15:28:50 serv1 pppd[28141]: sent [LCP EchoReq id=0x0 magic=0x9aef] > > Apr 28 15:28:51 serv1 pppd[28141]: rcvd [LCP EchoRep id=0x0 magic=0xa741f25] > > Apr 28 15:28:53 serv1 pppd[28141]: rcvd [PAP AuthReq id=0x2 user="paul" > > password="mypassword"] > > Apr 28 15:28:53 serv1 pppd[28141]: PAP authentication failure for paul > > Apr 28 15:28:53 serv1 pppd[28141]: sent [PAP AuthNak id=0x2 "Login > > incorrect"] > > Apr 28 15:28:53 serv1 pppd[28141]: sent [LCP TermReq id=0x2 "Authentication > > failed"] > > Apr 28 15:28:54 serv1 pppd[28141]: rcvd [LCP TermAck id=0x2] > > Apr 28 15:28:54 serv1 pppd[28141]: Connection terminated. > > Apr 28 15:28:54 serv1 pppd[28141]: Hangup (SIGHUP) > > Apr 28 15:28:54 serv1 pppd[28141]: Exit. > > > > What are all the possible reasons for this responce? And how can I debug > > this problem further? > > -- > Jens B. Jorgensen > [EMAIL PROTECTED] > > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
