eric lin wrote: Dear Pasha: new error, after I go to my /usr/lib/cgi-bin/ to create a file entrance.cgi
and put a space char in it. then chmod 777 that entrance.cgi and up one level, chmod 777 cgi-bin
revisit my site, hit submit botton
it show
Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
please help
pasha wrote:
What does your logfile say?
You have two problems, as I understand:
First, your apache doesn't seem to feed index.html when you access checkout
directory. A quick test would show relevant results:
put your index.html file into /var/www and then, using your favorite
browser, go to www.linuxspice.com. If your index.html page shows up without
explicitly stating it within the URL - then your problem is with the
checkout directory - meaning one (or several) of the following:
a) your checkout directory isn't readable/executable by www-data user or group
b) your directory is misconfigured in httpd.conf
c) you have an .htacess file within the directory that changes apache's
behavior upon access of the checkout directory.
If your /var/www/index.html _isn't_ displayed by the browser when you access
www.linuxspice.com then there could be other problems. In that case -
increase the loglevel inside your httpd.conf and examine your logs during
apache's restart.
Your second problem is that your cgi isn't found, when accessed from within
your html file. First off, make sure that the domain name actually resolves
by your apache; you might wanna reference your cgi otherwise...
Check yout httpd.conf for spelling errors (no one is perfect)
Make sure that your cgi-bin directory is accessable by www-data group and
your cgi script is executable and readable by www-data.
Also, when I accessed www.linuxspice.com/checkout - it became evident that
some page got loaded (look at the source). I suspect that your index.html
file is erreneous. First off - there are no <body> tags inside framesets.
Framesets are comprised of definitions of frames. <noframes> is seperate
from framesets.
:P
On Thu, Dec 12, 2002 at 04:08:58AM -0700, eric lin wrote:
Dear Pasha:
I put the attached file to /etc/apache/httpd.conf
and (1) when I type http://www.linuxpice.com/checkout
it still a piece of white
(2) I have a line in my /var/www/index.html
<form action="http://www.linuxspice.com/cgi-bin/entrance.cgi"; method="post">
also have /var/www/cgi-bin directiory
but when I hit submit form in my site , the browser appear
Not Found
The requested URL /cgi-bin/entrance.cgi was not found on this server.
but as what I tried last time if I type http://www.linuxspice.com/checkout/index.html
I do can see my site source in my /var/www/checkout/index.html
so it seem have no change between your modify version and old debian version.
please give more explanation or any linuxer's advice
Eric
-------------------------------------------------------------------
pasha wrote:
See attached file... Use diff to see the differences made; I kept all
changes together - so it should be easy to spot.
You should check the attached file for consistency with the way your system
is setup (location of files, etc).
With this setup you can keep you cgi's either in checkout directory or your
system's cgi directory - but you must check to see if those cgi scripts are
readable by www-data group!!!
[You should also consider using mime-types - which will allow apache to
handle certain file-types accordingly.]
If you run into errors when restarting apache - check your
/var/log/apache/error.log file.
------------------------------------------------------------------------
# This is the main server configuration file. See URL http://www.apache.org/
# for instructions.
# Do NOT simply read the instructions in here without understanding
# what they do, if you are unsure consult the online docs. You have been
# warned. # Originally by Rob McCool
# Shared Object Module Loading:
# To be able to use the functionality of a module which was built
# as a shared object you have to place corresponding `LoadModule'
# lines at this location so the directives contained in it are
# actually available _before_ they are used. # Example:
# ServerType is either inetd, or standalone.
ServerType standalone
# If you are running from inetd, go to "ServerAdmin".
# Port: The port the standalone listens to. For ports < 1023, you will
# need httpd to be run as root initially.
Port 80
# HostnameLookups: Log the names of clients or just their IP numbers
# e.g. www.apache.org (on) or 204.62.129.132 (off)
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on.
HostnameLookups off
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. # User/Group: The name (or #number) of the user/group to run httpd as.
# On SCO (ODT 3) use User nouser and Group nogroup
# On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
User www-data
Group www-data
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.
ServerAdmin webmaster@localhost
# ServerRoot: The directory the server's config, error, and log files
# are kept in.
# NOTE! If you intend to place this on a NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation,
# you will save yourself a lot of trouble.
ServerRoot /etc/apache
# BindAddress: You can support virtual hosts with this option. This option
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the VirtualHost directive.
#BindAddress *
# The Debian package of Apache loads every feature as shared modules.
# Please keep this LoadModule: line here, it is needed for installation.
# LoadModule vhost_alias_module /usr/lib/apache/1.3/mod_vhost_alias.so
# LoadModule env_module /usr/lib/apache/1.3/mod_env.so
LoadModule config_log_module /usr/lib/apache/1.3/mod_log_config.so
# LoadModule mime_magic_module /usr/lib/apache/1.3/mod_mime_magic.so
LoadModule mime_module /usr/lib/apache/1.3/mod_mime.so
LoadModule negotiation_module /usr/lib/apache/1.3/mod_negotiation.so
LoadModule status_module /usr/lib/apache/1.3/mod_status.so
# LoadModule info_module /usr/lib/apache/1.3/mod_info.so
# LoadModule includes_module /usr/lib/apache/1.3/mod_include.so
LoadModule autoindex_module /usr/lib/apache/1.3/mod_autoindex.so
LoadModule dir_module /usr/lib/apache/1.3/mod_dir.so
LoadModule cgi_module /usr/lib/apache/1.3/mod_cgi.so
# LoadModule asis_module /usr/lib/apache/1.3/mod_asis.so
# LoadModule imap_module /usr/lib/apache/1.3/mod_imap.so
# LoadModule action_module /usr/lib/apache/1.3/mod_actions.so
# LoadModule speling_module /usr/lib/apache/1.3/mod_speling.so
LoadModule userdir_module /usr/lib/apache/1.3/mod_userdir.so
LoadModule alias_module /usr/lib/apache/1.3/mod_alias.so
LoadModule rewrite_module /usr/lib/apache/1.3/mod_rewrite.so
LoadModule access_module /usr/lib/apache/1.3/mod_access.so
LoadModule auth_module /usr/lib/apache/1.3/mod_auth.so
# LoadModule anon_auth_module /usr/lib/apache/1.3/mod_auth_anon.so
# LoadModule dbm_auth_module /usr/lib/apache/1.3/mod_auth_dbm.so
# LoadModule db_auth_module /usr/lib/apache/1.3/mod_auth_db.so
# LoadModule proxy_module /usr/lib/apache/1.3/libproxy.so
# LoadModule digest_module /usr/lib/apache/1.3/mod_digest.so
# LoadModule cern_meta_module /usr/lib/apache/1.3/mod_cern_meta.so
LoadModule expires_module /usr/lib/apache/1.3/mod_expires.so
# LoadModule headers_module /usr/lib/apache/1.3/mod_headers.so
# LoadModule usertrack_module /usr/lib/apache/1.3/mod_usertrack.so
LoadModule unique_id_module /usr/lib/apache/1.3/mod_unique_id.so
LoadModule setenvif_module /usr/lib/apache/1.3/mod_setenvif.so
# LoadModule sys_auth_module /usr/lib/apache/1.3/mod_auth_sys.so
# LoadModule put_module /usr/lib/apache/1.3/mod_put.so
# LoadModule throttle_module /usr/lib/apache/1.3/mod_throttle.so
# LoadModule allowdev_module /usr/lib/apache/1.3/mod_allowdev.so
# LoadModule eaccess_module /usr/lib/apache/1.3/mod_eaccess.so
# LoadModule roaming_module /usr/lib/apache/1.3/mod_roaming.so
ExtendedStatus on
# ErrorLog: The location of the error log file. If this does not start
# with /, ServerRoot is prepended to it.
ErrorLog /var/log/apache/error.log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %T %v" full
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location of the access logfile (Common Logfile Format).
# If this does not start with /, ServerRoot is prepended to it.
CustomLog /var/log/apache/access.log common
# If you would like to have an agent and referer logfile uncomment the
# following directives.
#CustomLog /var/log/apache/referer.log referer
#CustomLog /var/log/apache/agent.log agent
# If you prefer a single logfile with access, agent and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog /var/log/apache/access.log combined
# PidFile: The file the server should log its pid to
PidFile /var/run/apache.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file is created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.
# ScoreBoardFile logs/apache_runtime_status
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename. #
LockFile /var/run/apache.lock
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e. use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name you # define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
#ServerName new.host.name
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a url that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGIs.
UseCanonicalName on
# CacheNegotiatedDocs: By default, Apache sends Pragma: no-cache with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# Timeout: The number of seconds before receives and sends time out
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We reccomend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. These values are probably OK for most sites ---
MinSpareServers 5
MaxSpareServers 10
# Number of servers to start --- should be a reasonable ballpark figure.
StartServers 5
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# Unix with it as it spirals down...
MaxClients 150
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies.
# The child will exit so as to avoid problems after prolonged use when
# Apache (and maybe the libraries it uses) leak. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries.
MaxRequestsPerChild 30
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the VirtualHost command
#Listen 3000
#Listen 12.34.56.78:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot /var/www
# First, we configure the "default" to be a very restrictive set of # permissions. <Directory />
Options SymLinksIfOwnerMatch
AllowOverride None
</Directory>
# This should be changed to whatever you set DocumentRoot to.
<Directory /var/www/>
Options Includes Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html index.htm index.shtml index.cgi
</IfModule> # ScriptAlias: This controls which directories contain server scripts.
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory /usr/lib/cgi-bin/>
AllowOverride None
Options ExecCGI
Order allow,deny
Allow from all
</Directory>
# Access to other directories
<Directory /var/www/checkout/>
Options Includes ExecCGI FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# VirtualHost: Allows the daemon to respond to requests for more than one
# server address, if your server machine is configured to accept IP packets
# for multiple addresses. This can be accomplished with the ifconfig # alias flag, or through kernel patches like VIF.
# Any httpd.conf or srm.conf directive may go into a VirtualHost command.
# See also the BindAddress entry.
#<VirtualHost host.some_domain.com>
#ServerAdmin [EMAIL PROTECTED]
#DocumentRoot /var/www/host.some_domain.com
#ServerName host.some_domain.com
#ErrorLog /var/log/apache/host.some_domain.com-error.log
#TransferLog /var/log/apache/host.some_domain.com-access.log
#</VirtualHost>
-- Sincere Eric www.linuxspice.com linux pc for sale# This is the main server configuration file. See URL http://www.apache.org/
# for instructions.
# Do NOT simply read the instructions in here without understanding
# what they do, if you are unsure consult the online docs. You have been
# warned. # Originally by Rob McCool
# Shared Object Module Loading:
# To be able to use the functionality of a module which was built
# as a shared object you have to place corresponding `LoadModule'
# lines at this location so the directives contained in it are
# actually available _before_ they are used. # Example:
# ServerType is either inetd, or standalone.
ServerType standalone
# If you are running from inetd, go to "ServerAdmin".
# Port: The port the standalone listens to. For ports < 1023, you will
# need httpd to be run as root initially.
Port 80
# HostnameLookups: Log the names of clients or just their IP numbers
# e.g. www.apache.org (on) or 204.62.129.132 (off)
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on.
HostnameLookups off
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. # User/Group: The name (or #number) of the user/group to run httpd as.
# On SCO (ODT 3) use User nouser and Group nogroup
# On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
User www-data
Group www-data
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.
ServerAdmin webmaster@localhost
# ServerRoot: The directory the server's config, error, and log files
# are kept in.
# NOTE! If you intend to place this on a NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation,
# you will save yourself a lot of trouble.
ServerRoot /etc/apache
# BindAddress: You can support virtual hosts with this option. This option
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the VirtualHost directive.
#BindAddress *
# The Debian package of Apache loads every feature as shared modules.
# Please keep this LoadModule: line here, it is needed for installation.
# LoadModule vhost_alias_module /usr/lib/apache/1.3/mod_vhost_alias.so
# LoadModule env_module /usr/lib/apache/1.3/mod_env.so
LoadModule config_log_module /usr/lib/apache/1.3/mod_log_config.so
# LoadModule mime_magic_module /usr/lib/apache/1.3/mod_mime_magic.so
LoadModule mime_module /usr/lib/apache/1.3/mod_mime.so
LoadModule negotiation_module /usr/lib/apache/1.3/mod_negotiation.so
LoadModule status_module /usr/lib/apache/1.3/mod_status.so
# LoadModule info_module /usr/lib/apache/1.3/mod_info.so
# LoadModule includes_module /usr/lib/apache/1.3/mod_include.so
LoadModule autoindex_module /usr/lib/apache/1.3/mod_autoindex.so
LoadModule dir_module /usr/lib/apache/1.3/mod_dir.so
LoadModule cgi_module /usr/lib/apache/1.3/mod_cgi.so
# LoadModule asis_module /usr/lib/apache/1.3/mod_asis.so
# LoadModule imap_module /usr/lib/apache/1.3/mod_imap.so
# LoadModule action_module /usr/lib/apache/1.3/mod_actions.so
# LoadModule speling_module /usr/lib/apache/1.3/mod_speling.so
LoadModule userdir_module /usr/lib/apache/1.3/mod_userdir.so
LoadModule alias_module /usr/lib/apache/1.3/mod_alias.so
LoadModule rewrite_module /usr/lib/apache/1.3/mod_rewrite.so
LoadModule access_module /usr/lib/apache/1.3/mod_access.so
LoadModule auth_module /usr/lib/apache/1.3/mod_auth.so
# LoadModule anon_auth_module /usr/lib/apache/1.3/mod_auth_anon.so
# LoadModule dbm_auth_module /usr/lib/apache/1.3/mod_auth_dbm.so
# LoadModule db_auth_module /usr/lib/apache/1.3/mod_auth_db.so
# LoadModule proxy_module /usr/lib/apache/1.3/libproxy.so
# LoadModule digest_module /usr/lib/apache/1.3/mod_digest.so
# LoadModule cern_meta_module /usr/lib/apache/1.3/mod_cern_meta.so
LoadModule expires_module /usr/lib/apache/1.3/mod_expires.so
# LoadModule headers_module /usr/lib/apache/1.3/mod_headers.so
# LoadModule usertrack_module /usr/lib/apache/1.3/mod_usertrack.so
LoadModule unique_id_module /usr/lib/apache/1.3/mod_unique_id.so
LoadModule setenvif_module /usr/lib/apache/1.3/mod_setenvif.so
# LoadModule sys_auth_module /usr/lib/apache/1.3/mod_auth_sys.so
# LoadModule put_module /usr/lib/apache/1.3/mod_put.so
# LoadModule throttle_module /usr/lib/apache/1.3/mod_throttle.so
# LoadModule allowdev_module /usr/lib/apache/1.3/mod_allowdev.so
# LoadModule eaccess_module /usr/lib/apache/1.3/mod_eaccess.so
# LoadModule roaming_module /usr/lib/apache/1.3/mod_roaming.so
ExtendedStatus on
# ErrorLog: The location of the error log file. If this does not start
# with /, ServerRoot is prepended to it.
ErrorLog /var/log/apache/error.log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %T %v" full
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location of the access logfile (Common Logfile Format).
# If this does not start with /, ServerRoot is prepended to it.
CustomLog /var/log/apache/access.log common
# If you would like to have an agent and referer logfile uncomment the
# following directives.
#CustomLog /var/log/apache/referer.log referer
#CustomLog /var/log/apache/agent.log agent
# If you prefer a single logfile with access, agent and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog /var/log/apache/access.log combined
# PidFile: The file the server should log its pid to
PidFile /var/run/apache.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file is created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.
# ScoreBoardFile logs/apache_runtime_status
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename. #
LockFile /var/run/apache.lock
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e. use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name you # define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
#ServerName new.host.name
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a url that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGIs.
UseCanonicalName on
# CacheNegotiatedDocs: By default, Apache sends Pragma: no-cache with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# Timeout: The number of seconds before receives and sends time out
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We reccomend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. These values are probably OK for most sites ---
MinSpareServers 5
MaxSpareServers 10
# Number of servers to start --- should be a reasonable ballpark figure.
StartServers 5
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# Unix with it as it spirals down...
MaxClients 150
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies.
# The child will exit so as to avoid problems after prolonged use when
# Apache (and maybe the libraries it uses) leak. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries.
MaxRequestsPerChild 30
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the VirtualHost command
#Listen 3000
#Listen 12.34.56.78:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot /var/www
# First, we configure the "default" to be a very restrictive set of # permissions. <Directory />
Options SymLinksIfOwnerMatch
AllowOverride None
</Directory>
# This should be changed to whatever you set DocumentRoot to.
<Directory /var/www/>
Options Includes Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html index.htm index.shtml index.cgi
</IfModule> # ScriptAlias: This controls which directories contain server scripts.
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory /usr/lib/cgi-bin/>
AllowOverride None
Options ExecCGI
Order allow,deny
Allow from all
</Directory>
# Access to other directories
<Directory /var/www/checkout/>
Options Includes ExecCGI FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# VirtualHost: Allows the daemon to respond to requests for more than one
# server address, if your server machine is configured to accept IP packets
# for multiple addresses. This can be accomplished with the ifconfig # alias flag, or through kernel patches like VIF.
# Any httpd.conf or srm.conf directive may go into a VirtualHost command.
# See also the BindAddress entry.
#<VirtualHost host.some_domain.com>
#ServerAdmin [EMAIL PROTECTED]
#DocumentRoot /var/www/host.some_domain.com
#ServerName host.some_domain.com
#ErrorLog /var/log/apache/host.some_domain.com-error.log
#TransferLog /var/log/apache/host.some_domain.com-access.log
#</VirtualHost>
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
