Hello
I'm having problem updating the kernel after an installation of woody.
I dont know what caused it so i paste the diffrent bootup messages.
---/snip bf2.4 boot messages
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1440-0x1447, BIOS settings: hda:pio, hdb:DMA
hda: SunDisk SDTB-128, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 31360 sectors (16 MB) w/1KiB Cache, CHS=490/2/32 ide-floppy driver
0.97.sv Partition check:
hda:
Floppy drive(s): fd0 is 1.44M
PCI: Enabling device 00:11.0 (0000 -> 0003)
PCI: Found IRQ 5 for device 00:11.0
PCI: Sharing IRQ 5 with 01:00.0
cpqarray: Sorry, I don't know how to access the SMART Array controller
00000000
PCI: Found IRQ 5 for device 00:11.0
PCI: Sharing IRQ 5 with 01:00.0
---------the last 6 lines loops 4 ever---
-------standard kernel from boot floppy -- ---
Loading Linux..................Linux version 2.2.20 (herbert@gondolin)
(gcc version 2.7.2.3) #1 Sat Apr 20 11:45:28 EST 2002
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1440-0x1447, BIOS settings: hda:pio, hdb:DMA
hda: SunDisk SDTB-128, ATA DISK drive
hdb: IBM-DBCA-206480, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: SunDisk SDTB-128, 15MB w/1kB Cache, CHS=490/2/32
hdb: IBM-DBCA-206480, 6194MB w/420kB Cache, CHS=789/255/63 Floppy
drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Partition check:
hda:
hdb: hdb1 hdb2
------- i need some of the featurs in 2.4.x but as you can see the bf2.4
does not find hdb...
Lasse
--------------------------------------------
Light thinks it travels faster than anything but it's wrong. No matter
how fast light travels it finds the darkness has always got there first,
and is waiting for it.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
